Hi there, everybody,
I'm a new member of RSVZONE from Taiwan.
please forget my poor English.
The problem of my 2003 RSV mille is when I push START button,
the engine just run,but only less than one second, very hard to start the engine.
This bike no used about 5 years,I've cleaned all the...
just popped into town, only just over a mile, but stuck in plenty of traffic and noticed the temp reading was at 94. As i rode back it cooled down to around 80, good air flow on return journey.
The fans did'nt kick in at all, not sure what temp they do but would have thought it should be way...
Hi Guys. I'm brand new to this forum and have picked up a 2001 RSVR in Yellow with only 7k on the clock about three weeks ago.
Love the bike and was riding it back home through a heavy shower the other day. Got it home and the alarm (Absolute Protec) wouldn't activate. The immobiliser came on...
After reading some posts on here and a bit of Googling I came across sr sign design.com
They offered foil exhaust stickers and I bought these
After my first ride out today and only going for about 10mins before stopping for fuel, I was greeted one end wrinkling up with the heat, then after...
I am having to haul the clutch lever all the way in to dis-engage the clutch
I adjusted it ... but it still aint right
There is "resistance" ... but its as though there isnt enough pressure to break the drive
Fluid level ok
Remember I did fit a new lever a few weeks ago after my tippage ...
Try and explain this one to me:
Bike was running and started fine.
New tyres fitted. :biggrin
Bike started by garage to ride bike to front of garage. Engine turned off.
I pay the bill and go to start my bike. It turns over but won't fire. :confused It's making a bit of a noise and i start...
Hi
I'm new to the forum and have a 56 plate Tuono R. I've had it about a year and don't use it enough, it's a great bike - better than the jap stuff I had previously.
Having read a few issues with engines going pop on the forum I am concerned about a problem with the oil warning on the...
hello all
ive been out on my bike today, and a few times its popped out of second, and i keep getting false neutrals!! now my slave is leaking, would this cause me problems?? or would this have the opposite effect and hold it in gear?? i do also generally shift up with out using the clutch...
Hi everyone,
My RSVR 2005 has recently broke down. The problem being that it wasn`t charging the Battery .
I have purchased a new battery and had the alternator/ stator re-wound. The next thing i am in the process of is getting a new regulator/ rectifier.
Aprilia sell them at a hefty £270, but...
Hi folks,
I sold some wheels on flebay yesterday.
They are from a Gen 2 Tuono. The ones that look like OZ bit aint.
The gent that bought them has a 2001 mille and he says the front will not fit:dowhat
Confused as I had a set of OZ hoops off my other 56 plate Tuono ( same forks etc) and...
hi have a 2000 rsv a little while now and the clutch fluid was black changed it a bleed it grand , goes in to all gears lovely and neutral but as soon as i get 2 about 5000 revs it just revs and nothing happens. is there any adjustn on them. or does this sound like new plates needed new to the rsv
Hi there took my clutch ( primary case ) case cover off too renew main gasket , now I have gear selection problems when the casing is bolted down , but when I loosen the casing off the gear selection is fine no problems at all wierd any ideas guys < I have perfect gear change with no casing ...
hey guys, got out for the first proper ride of this year, loving the weather ! The bike feels great but ive got a little problem. Throttle openings from 0% to about 10% travelling at slow speeds (ie through town) are really 'fluffy' and a bit 'laggy' (not very responsive). my bike also spits a...
I have fitted new levers. With the new clutch lever adjusted fully outwards (away from the handle bar) it is now a bit more difficult to engage gears – and find neutral as the clutch biting point is slightly closer to the handle bar than with the original lever (which was adjusted fully –...
Hi All
Sad day today I missed a track day at Cadwell as my Aprilia RSV4F SE APRC won't start. The problem sounds like a flat battery, i.e. can't turn the engine over, followed by a few clicks coming from I guess the relay, but the dealer has now fitted Two New Batteries. The Alternator pumps...
I've just bought a bargain Mille for £1500 and the only issue it has is this...
When turning the igntion on, you have to turn the key all the way and then back by about 1mm to get power, it will sometimes stay on, but any tiny bump or knock could move the key to the full position switching it...
got the bike out today for the first time this year:thumbup and NO CLUTCH:bawling
no pressure on leaver tried to bleed system but no joy:banghead any help
cheers shane
Hi
My indicators dont work. Tried with a new relay didnt work. There is 13v on the wire but it doesn´t turn on and off like it should! And the indicators in the panal dont flash either??
What is the problem??
I need help please folks. I replaced my steering head bearings last year for some Koyo tapered rollers part number 32907 JR3 from Marksman Industrial. Ever since they haven’t been right (the steering was either too stiff or too slack). :confused
So I decided to remove them again and replace...
Hi guys, after topyokes managed to finally send out the spacers for the bar risers, I've started fitting the controls to the bars on my RSV's comfort kit.
The problem I'm faced with now is that I can't roll the bars towards me any more or the starter button and horn button on the switchgears...