problem

Bought my first RSV today off a chap from this Forum, when i accelerate at approx 8k revs the bike kinds of jaults as if its hitting the limiter earlie, at first i thought the limiter revs had been changed but i found out that cant be done, it has an alarm fitted, not sure of make, hawkcaralarms...

Could be just my imagination but last Saturday I left the bike parked outside all day and it rained quite a bit,upon coming to fire her up to go home I set the fast idle as usual but she wouldnt fire up,she coughed a bit,spluttered and then nothing,eventually I flattened the battery,now this...

I have a triton aprilia 1998/2000 eprom and when i install in on my 2000 rsv after i turn the ignition on it makes noises inside the ecu. can anyone tell me if theres something to do after install a new eprom,or probably this one has problems. thanks

recently i installed a 2-2 exhaust on a 2000 rsv,i had to make some welding on the bike.and installed a new eprom too. before welding i removed the ecu out and disconected the battery. now when i turn the ignition on, the electronic noise doenst work anymore,and after push the button appears efi...

Hi all, Can you help i have a 1999 rsv 1000 mille, The problem I have is that the dash is in KM. I have tried to change it by pressing the A button but this doen't work. Also I can't seem to change anything by the buttons except to reset the trip meter. Everything else works on the dash...

I own a 2000 rsv mille and the sidestand is a little short it is basically as stable george dubya with a nuke. :dowhat Can anyone help me and give me info on which sidestands are compatible with my bike I have heard gixxa stands are but what year/model are there any other bike stands that can be...

hi, this is my 1st post so here goes. i have an 02 rsvr and i have problem with the position of my front wheel in the forks. it seems to sit more to the left if looking from the front and this is offsetting the discs so they are further too the left in the calipers. i think this has caused the...

hi every one, i just installed a new sprag clutch,and a solenoid,when i swing the motor im still getting some banging noise from the sprag area? should i tighten the spring around the sprag? any help much appreciated,thanks all the other parts around the sprag were in good nick,not to much wear...

Hey guys, Well, couple of issues recently. Firstly, every now and again when in 2nd gear at about 4k rpm, and I roll it on, it seems to what i can only explain as misfire/cough/choke momentarily. The only think that has changed recently is the exhaust for a titanium leo vince race item. Could...

hi,i have an 99 rsv,i just bought it with the sprag clutch gone,so i replaced it with a new one,the bike starts when i hook it up to my van with the engine running,it wont start of the battery or a jummper box,it seems like it drains all the power to swing the engine,the jummper box should start...

help needed please, the tacho needle at rest sits up by the max rev light, and when in use it seems to under read by a large margin, ie i am changing up an indicated 2500rpm, its allmost as if the insides have been put together 90 degrees out, any ideas, or is it an attack of Italian elecrics...

Hey guys had my 05 rsv-r for about 2 weeks now and covered about 500 miles, loving it. Putting the akras and getting the map02 tomorrow so that should be sweet. However, sometimes when i hit the rev limiter instead of bouncing off it there a whole load of what i presume is engine brake like i've...

Hi, I'm having a problem with 02 RSVR, went through the threads but couldn't find similar issue. In 90 % bike starting fine when is cold, than if I ride it for few minutes and for example stop at garage to fill up, it won't restart, I can hear a loud metal bang, starter would spin 1-2 times...

Hi guys, I took the RSV to Mallory for it's first track day on Friday and I was really impressed by it. It felt very stable and pulled well out of the corners. Only problem is I've fried my front brake!!! Lever pulls back to the bar and now there is noticeable drag- is this just a case of...

Ive just had a look at my Brother in laws CBR1000rr sidestand and it looks exactly the same apart from the fixing plate that bolts to the frame the actually sidestand is exactly the same as ours but 18mm longer and has a slight bend in it to push it our further. The switch itself is exactly the...