clutch

the question is if I remove the clutch slave is oil going to leak on to my garage floor? my clutch fluid is starting to go black so I want to drain the fluid remove the slave and check any seals to see if oil is getting in to the fluid but want to know if I need to drain the engine oil first...

A tough question I know but hopefully someone can give me a few hints and tips.... I've read so far clutch slip can be caused by a number of things. Anyway, I got my Mille last tuesday so I've only been able to give the bike a couple of runs. After bringing the bike home I found that there was...

thought this may come in handy :thumbup http://www.oberon-performance.com/acatalog/Aprilia_Clutch_Slave_Cylinder_Instructions.pdf

hi guys ,has anyone got pics of the jet mod that needs doing ? .ive played around with the clutch lever but not much help there , also been told the 08 model comes with the mod already done ?? if this is true then why the hell have i got the problem then :( . my old gen 1 clutch is perfect...

Had a few starting problems lately. After turning engine over repeatedly it eventually started and ran ok but not before making a lot of nasty sounding noises. Spragg clutch slipping I assume? Removed my spragg clutch tonight with a lot of help from a good mate (thanks Steve). :thumbup Now it is...

hi there, has anybody got a set of standard clutch springs theyd like to sell? need a set asap.cheers :thumbup

Hi guys I am just installing a new clutch kit, and think I am going right. However I'm now stuck at one particular point!! I've assembled the steels/frictions and I'm just bolting the 6 springs in, the thing is??? I can't remember how far in to tighten them, or is there a length I have to...

Need to bleed my brakes/clutch on my aprilia mille 99 What oil should I use?

I,ve just emptied brake and clutch fluid and renewed with fresh. I,ve bled the brakes no problem and they are fine. Thing is, after bleeding the clutch, it's now like rock hard to pull the lever in, like harder than front brake and its not disengaging the clutch although I can hear the clutch...

Hi All, Recently bought some new levers for my T, and brake one is fine, but the clutch side, i can't get the little brass coloured pin out of the dowel to swap it over to the new lever. Any ideas or does anyone have any spare dowels & pins i could have/purchase? Cheers Rob

Hi all, I've read most of the posts but cannot find one that describes exactly the problem on my bike. So to start is a 04 Mille first shape, and the problem I'm experiencing is as follow, it is very difficult, if not impossible, to change up from first to second gear using the clutch, it keeps...

Hi,can someone explain how the slipper clutch works on the 2006? I had a problem at the track,I dropped it down to 2nd,turned into the corner and it started a "skipping" type action,very alarming making me stand it up and run off track!:dunno,cheers

Well guys decided to change my clutch jet today after getting a new one from Aprilia, all went well until I tried to remove it , on closer inspection some one had been there before me and some how had chewed the slot up on the jet , so where do i go from here any advice how to get it out ...

wanting to get the 0.4 jet for my 00 millie, ever since I fitted the barnett clutch it drags like hell, and neutral is a no no unless the bike is actually moving...anyone got any actual step by step pics? Olli. l

Anyone selling one??? Don't know if they fit all models but it's for a gen 2 factory. Cheers!! Andi

Black with red adjuster, standard length. Pretty much as new in box and registered with ASV. £60 delivered. http://www.tuonoworld.com/index.php?topic=555.0

I have a pair of radial brake and clutch master cylinders for sale, these were removed from an 06 factory with 8500 miles and are in very good condition. I am looking for £75 each or £140 for the pair, these are an excelent upgrade to the standard RSV units. Mark

If I cant find a replacment eal I`m gonna have to buy a second hand clutch master. (cant afford new) I`m wondering if any clutch master of another bike would fit, or does it have to be 02 rsv?? And if maybe there would actually be any that would be better than an rsv one??? Suggestions??? Its...

Ok here goes with my first post on any forum ever!!!!!!!!! My RSV started developing what i can only describe as a"floppy" clutch lever which eventually resulted in not being able to change gear! Well..not strictly true i was still able to do so by balancing the revs and using a little more...

Hi ! can anyone tell me if an 05 clutch basket will fit a 99 mille ?