clutch

hello, I have a 04 rsv 1000r and i've got a problem with it stalling... What it does is when I'm in neutral and standing still if i blip the throttle to about 3000rpm and then let go of the throttle, it stalls. Also, when approaching a traffic light, I pull in the clutch for the last 2-3 secs...

Good afternoon everyone. every week I have to top up my oil for my clutch, there is no oil that I can see coming out of either the master cylinder or slave cylinder, I have checked the hoses for leaks. anyone have any ideas???????????? 2001 RSV Mille cheers my dears

I`m assuming its the clutch master. Pull the clutch half way and hold it, it looses pressure you you see the resovoir level rise until levers back to the bar. Let go and grab a fresh pump, fluid level goes back down, as pressure returns, before dropping again. Doh! Is it worth rebuilding it? or...

After my little tumble at Cadwell a few days ago I was told a slipper clutch would have saved me, anyone have one of these fitted to their bike? Was also told the tuono has a Back torque limiter? If mine does it doesn't work, anyone know anything about this or has he made it up? Or and it's a...

Hi all Why do I have to keep topping up my clutch fluid every few weeks, it appears to not leak anywhere or drip on the floor. Any idea's please? Regards Lee

Hi After changing the clutch on my 2000 rsv, It started to have alot of drag which I understand is quite common, but now it's getting difficult to change gear and sometimes it feel like it's stuck in gear? the pedal gose solid and I have to change speed to get it to change gear. I have re...

I need to bleed my clutch urgently, but can't find the black fluid stocked anywhere. Does anyone know of a supplier, or should I just grind up some coal and add that to the normal stuff?

Rsvf 04, unable to backfill oil in to resevioir, can only do clutch (line) clutch really stiff and dosnt like to go into gears, un-able to back fill! Stripped clutch leaver down and ok, but just can't understand why won't drain or re-fill from resiovoir? Ta

Help needed chaps Fitting a new mpl clutch slave to 01 rsvr. I've read all the previous threads (I think) and have fitted the slave, I bought a bleeder and revearse bled from the nipple loads of times. (forced fluid in from the slave) Still the lever comes to the bar with no bite. Tried the...

Just taken delivery of an Oberon slave cyl. Will be fitting this evening. Anyone know what the correct tightening torque is for the banjo coupling. I can find values for the mounting bolts but not the banjo.

I have an Evoluzione clutch slave on my '02 (not fitted by me) It leaked all the fluid so I stripped it down, one of the three oring seals had a chunk out of it. I replaced the oring but it's still leaking. I'm thinking I will replace the cylinder, my main question is: the cylinder is comprised...

Hi, I have a 2004 Tuono Gen 1 with approx 19k miles, yesterday I took it our for a ride and having travelled approx 2 miles noticed the clutch did not seem to operate - I pulled over and it stalled as I could not disengage. Put it back into neutral started her up and no change - the clutch made...

Hi Fella's, wondering if anyone can help. I have a 2004 Tuono and noticed the clutch fluid was turning black and the biting point was changing when riding. I initially changed the fluid which turned black within 100 miles and then changed the slave cylinder seal for a new one. The fluid again...

hi guys can anyone help me out here . 2000 mille what other models have the same clutch basket fitted and from what years will do or can later models be used . cheers guys :biggrin

I recently had an issue with the clutch on my RSV Mille R 00. The clutch would not allways work and I found myself fighting the gearbox from time to time. I noticed that if I pulled the lever really slowly that nothing would happen. The clutch would not move. If I pulled it harder and faster...

Hi My first post and it's a wanted post! :jack As the title states; I am after the barrel and stud that sits in the clutch lever and applies pressure in the clutch master cylinder, can anyone help please? Cheers Spence!!!

Hi guys, blew my clutch release bearing at Knockhill, when I took it all apart the bearing pn.16004 is a ball race and not a thrust bearing anybody with same problem and is there a thrust bearing that will fit?

Hello Gang, I am after some advice regarding my 2008 RSV.I have an issue with the clutch,when I have been for a ride the clutch lever doesnt seem to release smoothly.It makes it hard to pull away smoothly,it is also quite hard to get into neutral.The bike hasnt been used much...

Hi fellas My Evoluzione clutch slave just weed on the garage floor, ive stripped it down to find one of the three rubber seals has a chunk missing. Does anyone know where i can get replacements? (i cant seem to find any contacts for the company that produces them) Thanks Rob

Planning to fit a set of Gilles variobars to a 2003 RSV Mille R (radial brake caliper model) and require longer brake lines. I have noticed the standard braided clutch line and front brake lines are of the same material and have the same text printed on the outer to identify diameter etc...