It works it feckin works lads

AREESSMILL · May 23, 2009

JUST RECEIVED THE CBR1000RR SIDESTAND TOOK THE LEG OFF AND ATTCHED IT TO THE OEM PLATE AND IT FITS A TREAT. IM GONNA SELL THE SWITCH ON ITS OWN FOR A FIVER THUS THE LEG COST ME A TENNER!!

ATTACHED SOME PICS

:doug

ps it took an ***** like me 10 mins to fit

Gasboy · May 23, 2009

Cool part number plzzzzzzzzzzzz !!

AREESSMILL · May 23, 2009

Cbr 600/1000 rr from 2004 to i think 2006 or 7

ridethelight · May 23, 2009

Anyone know if it fits the 08 model too?

danf1234 · May 23, 2009

That's what I want to know. Are fittings the same for the old and new shape bikes?

kawasakiinit · May 23, 2009

danf1234 said:
That's what I want to know. Are fittings the same for the old and new shape bikes?

me too !!!!!!!!!!!!!!

spoonz · May 23, 2009

Bracket angle is different post 04. The GSXR stand is a perfect length for the post 04 but 1 " too long for pre 04 for example.

You'll have to buy one and just try it out.

Well done Tim by the way for being persitant.

mutts nuts · May 23, 2009

well done that man :thumbup

B o B · May 23, 2009

Excellent. Now I'm hunting for one to fit to my bike so I don't have to keep checking it.

Thanks again for sharing that with us. :thumbup

A303 · May 23, 2009

Nice one Tim. Thanks.

heroblob · May 23, 2009

Right i have bitten the bullet and just purchased from ebay an 06 CBR1000RR side stand with mount and spring. when it arrives i will try it on my 57 plate.
Fingers crossed this works, if not it will be available to purchase for anyone with a pre 04 bike.

Sprocker · May 23, 2009

heroblob said:
Right i have bitten the bullet and just purchased from ebay an 06 CBR1000RR side stand with mount and spring. when it arrives i will try it on my 57 plate.
Fingers crossed this works, if not it will be available to purchase for anyone with a pre 04 bike.

how much are they hero :dunno

First dibs if it doesn't fit yours :devious

BB1000 · May 23, 2009

spoonz said:
Bracket angle is different post 04. The GSXR stand is a perfect length for the post 04 but 1 " too long for pre 04 for example.

You'll have to buy one and just try it out.

Well done Tim by the way for being persitant.

Must depend on the gsxr stand then cos on my 04 bike it was to long

danf1234 · May 23, 2009

heroblob said:
Right i have bitten the bullet and just purchased from ebay an 06 CBR1000RR side stand with mount and spring. when it arrives i will try it on my 57 plate.
Fingers crossed this works, if not it will be available to purchase for anyone with a pre 04 bike.

Looks like its going to be too long mate. I have BB1000 stands with an inch cut off it and its perfect!

It looks like the new and old bike mounting brackets are totally different!

heroblob · May 23, 2009

sprocker said:
how much are they hero :dunno

First dibs if it doesn't fit yours :devious

just paid £21 with postage. and if it doesn't fit you have first shout.

will let you all know as soon as it arrives. This is all starting to make me mega paranoid about the stand situation. been following the threads for some time, have had a budsy on for about 12 months, with as far as i know no ill affects, but last years on a trip to Wales did use the stand to lift the rear wheel to lube the chain. luckily my bike has spent most of its life in the garage on a paddock stand, but i haven't looked at whether the stand has suffered or not. i could not bare to find her laying on her side all damaged, so must be replaced. even thought about going back to the original and just being careful were i park it.
Any how i must resolve this problem for my own piece of mind. hind sight is a terrible thing, i do not want to be the one that says if only i had done something about that sooner.

Vince · May 23, 2009

Ive bought 3!!,one's already on the Falco,I'll replace the one on the Mille which has a busbywoo one at the moment,I just dont trust it now that a few of the guys have had them break ,Ill stick it on flebay & othe cbr stand my mate will have,Ihad put an offer on one & wasnt patient enough to wait,shame the switch doesn't work a lot better made than the aprilia one but it only has 2 wires,the plug fits an all!

heroblob · May 23, 2009

Vince said:
Ive bought 3!!,one's already on the Falco,I'll replace the one on the Mille which has a busbywoo one at the moment,I just dont trust it now that a few of the guys have had them break ,Ill stick it on flebay & othe cbr stand my mate will have,Ihad put an offer on one & wasnt patient enough to wait,shame the switch doesn't work a lot better made than the aprilia one but it only has 2 wires,the plug fits an all!

Vince is there any mods that need doing to the CBR stand.
is the hole already drilled in it for the side stand switch. does the bolt pass through from the front the same as the aprilia or does it require moding like the GSXR stand, or is it a straight swap. If it is a straight swap the only thing left to worry about is if the length is right for the new shape, and if if fowls the exhaust and requires a weld to adjust the retracted position.
I'm the same as you, i'm not saying that my budsy will fail, but i couldn't bare it if it did, and i could have done something to prevent it.

A303 · May 23, 2009

Just bought an 06 one so you'd better be right Tim or Omar be comin' - ya feel me yo?!

AREESSMILL · May 23, 2009

A303 said:
Just bought an 06 one so you'd better be right Tim or Omar be comin' - ya feel me yo?!

Course it fits :thumbup

amb67 · May 24, 2009

Tim, that garage is a mess and FFS get that bike washed and polished. :devious

Well done with sorting out your side stand, can see that Honda side stand prices will shoot up in price shortly. LOL

Search

Search

It works it feckin works lads

AREESSMILL

Gasboy

AREESSMILL

ridethelight

danf1234

kawasakiinit

spoonz

mutts nuts

B o B

A303

heroblob

Sprocker

BB1000

danf1234

heroblob

Vince

heroblob

A303

AREESSMILL

amb67

Similar threads

New Posts