I brought an Rsv Mille 99 was stored for abit then running fine took it out one morning completely fine got all me gear on to go out on the night & just stopped priming fuel & wont fire, i changed oil plugs battery etc, Cleaned fuel tank & pump. Tipover sensor was bodged so i brought a new one & changed it.
put it back together it primed and fired cut out after ten seconds wouldnt prime again or fire. when i turn the ignition on there is no fuel priming noise just after a few seconds a click coming from under rear passenger from the 3 relays not sure if this is normal but cannot get my head around this, Ive put diagnostic mode on and it just reads -1 0 1 all the time no proper codes,
put it back together it primed and fired cut out after ten seconds wouldnt prime again or fire. when i turn the ignition on there is no fuel priming noise just after a few seconds a click coming from under rear passenger from the 3 relays not sure if this is normal but cannot get my head around this, Ive put diagnostic mode on and it just reads -1 0 1 all the time no proper codes,
