throttle

Hi, My '08 Factory has an annoying habit when travelling slowly through villages/towns etc at sub 30 mph - when applying small throttle openings it seems to pause before picking up, as though its running too rich or something. Can be a real pain if cranked over going around a corner too as...

ok guys n galls, done a track day at oulton yesterday..omg wot a circuit and the mille was far better than me, so stable and how much grunt...anyway.. come flying into the hizzy chicane on the brakes down two cogs off the brakes n the bike takes off at a pant soiling pace..dont even try to make...

Bike is back in pieces AGAIN to get clear coated so now i am fitting the 57mm CE TB and the PC3:doug:doug (fitted the Dr Rossi chip yesterday, (Thanks Dr Rossi)):thumbup:thumbup. I have the old throttle bodies off but i cant see how to take the injectors out, any ideas ?? :dunno I have...

can anyone sort me out throttle on me thumper is sticking it dont return when you let off the throttle which can be interesting sometimes

Hi all. I can't seem to adjust the cable. Is it a rubber sleeve over the adjuster - I can't seem to pull this along to access the adjuster & locknut. :jack

Get in quick !! 250370982902 on evilbay (guess what i'm doing tonight)

Have seen these on ebay and have two questions...

I've come across a set of 57mm throttle bodies from an '05 factory R. I've heard they can be fitted to a 2000 Mille R but I wondered how much hassle/set up that takes, if they bolt straight in with minimum fuss or if it's a nightmare. I'm going to fit a renegage kit and I was looking around...

Hi guys. On my way home from work this morning 4.30am i noticed that my throttle has started to stick, i now have to close it off that last little bit. any ideas how to sort this. Thanks Nige:thumbup

Took the bike out for a good thrash today. Making my way home late afternoon near Bath and opened her up to overtake a car and suddenly no power and wouldn't rev :dunno Pulled over to the side of the road and found the throttle had gone. Middle of nowhere and had forgotten my mobile :jack...

hello again I've got a 2000 RSVR with an Aprilia race can and the eprom chip. It's running a standard filter. I love the bike and i love the power but I want to fiddle with it and wondered what the best mods are for a bit more grunt. Carbon Air box? throttle bodies? etc etc... Also I've been...

This is my first post on the zone so be gentle with me!! I've got a 2007 Tuono and was wondering if anyone can help with a small problem? There is about half an inch play in the throttle before you get a pick up from the engine! does anyone know how to adjust this? Thanks keep up the good work

Hi New to this bike but I have located a screw on the throttle bodies which I believe to be air adjustment screws. What is the base setting for these from fully in as I think someone has played with them and does it just effect the tick over mixture or right through the range.:dunno

Riding to work this morning in near zero temperatures I noticed the throttle suddenly getting sticky - I put it down to something (other than my knuckles) freezing. However a post-work ride in warmer (everythings relative, right?) temperatures and the throttle's still sticking - quite handy on...

evening all! my mille has a developed a useful problem lol, the throttle doesnt snap back, so its like having cruise control haha - accelerating towards the back of cars with both your arms out like superman really freaks them out anyway, its obviously a slight problem - any one got any idea...

Hi guys, Last Saturday I took the bike to a garage to repack the exhaust and also to check why I was having problems with cold starts, the dash was resetting very often as well. It turned out that the fast idle had come loose so they adjusted it and changed the battery. No more problems with...

hi folks, i have a few performance mods and would like to know if any one has the 56mm throttle bodies fitted and if they work well? mine has Aprilia Evo airbox converter with airfilter,race exhaust(beowolf),power commander and re-chip. I wanna know if it would make alot of difference with what...

Hello, i was looking at this 56mm Throttle Bodies set-up from Amann Racing? 1. Good product? 2. 56mm T.B. stock style set-up? 3. Or 56mm T.B. open style set-up? let me know what you guy's think?www.rsvmille.de/products/56mm-throttle-body.html?L=1 Running 80mm Tigcraft 2-1 exhaust, EVO...

Ok fellas I maybe going to have a look at an early 2000 W reg RSVR soon. She's a bit tatty but mechanically sound save for needing new throttle cables. The guy selling it says the metal part on the end of the cable that goes into the handlebar/throttle has cracked? and the throttle sticks...

When riding at any speed and I let off the power I can hear and feel a slight "clunk" through the handlebars. Its not the head bearing as Southern Cross changed them. It's not really bad, just something i noticed. Any of you guys have it too? Is it normal? What could it be? Cheers for any help