change

im looking at doing an oil and filter change in the next couple of weeks on the Factory, just wandering, ive heard your supposed to ride the bike for 20mins or so b4 u check the oil and change it but i dont really want to be gettin her out with the roads soakin wet, covered in salt and full of...

The previous owner put an aftermarket eprom in. I feel it was running way to rich so wanted to try the stock chip. I replaced chip and turned the trim pots to 12 oclock and now it won't start. The diagnostics mode reads -1. does anyone have any suggestions? thanks

I like the rear seat cowls without the light intergrated in to it. Can this be fitted on a 2004 model? Cheers

Thought Id copy bad boy and change the look of the front end of my 04 shape RSVR I have got rid of what I can only describe as the "preditor Mouth" air intake vent. I have now added the Black gaurd from the newer model....see below. As you can see I have also added the Italian u shaped flag too.

Since I provide Eproms I would like to help fitting them. Here is a how to. If you do it like in the movie there is a big change the Eprom will die of statics. Look at the pictures and it explains itself. Here we have the ECU. Unscrew the 4 screws and lift up the lid This is what it looks...

from this to this prob not with the aprilia in yellow buy u get the idea what do u think ??

I've just purchased a blue flame exhaust system and whant to now how to put the ECU into "Map 2" without having to take it all the way to silvestone to get it changed. Alsocan you get a ECU to Laptop Cable? I've found a programme to use on your laptop for Aprilia Diagnostics and tests, Throttle...

Hi guys, can anyone tell mw where the starting point is for how much oil should go in before topping it up (if needed) after letting the engine run??? Cheers..............:thumbup

Here's one for all you clever people out there ..... What is the difference in the ecu units between an RSVR and a Falco ecu .........is there any difference at all or not ? And if there is and if i was to change a 2005 Falco ecu what years RSVR unit would be best to change it with...

To cut a long story short.... I had to have the ECU changed on the bike as it was blowing up coils. Before it went pop the bike was putting out 132bhp at the back wheel with a custom mapped PC3. I picked the bike up with the new ECU and on the same dyno the bike was only putting out 118bhp...

hi there am busy looking for another rsv wrecked mine last weekend wot a **** , just lookin at another 1 it s an 07 reg but it has the blue wheel s and the black frame not sure when they changed the frame to silver , so could anybody shed some light on the subject , cheer s

i'm sure i've seen one somewhere but been trying to find an oil change guide but I can't! could also do with recommendations for oil and also some good spark plugs n where to get them! cheers guys!

Can anyone recommend a decent oil for an oil change on my 2004 Mille R ? I have priced up the good stuff (Agip and IP) and will pay for it if I have to, but if there is a good alternative I would also consider that. Cheers.

But its in French but you get the idea. http://www.aprilia-v60.com/plugins/forum/forum_viewtopic.php?107685

As my sprag clutch has seen it's days (starter motor just spinns without engaging). Queston 1. It is normaly just the sprag clutch and housing that has to be changed? Not the gear also i hope? Question 2. Was looking on the price of the assembly at AF1 Racing and this was mention there "The...

I am about to change the filter and oil in my RSV for the first time and surprised that there is no how to in the "how to" forum! Can anyone point me to one? If not I guess I will try to make one when I do it myself. Any hints appreciated, was looking at a post advising on how to get the level...

Hopefuly tonight i will be fitting a new chip to my 03 mille. In laymans terms is this the correct way of doing it. . . . 1. seats off 2. battery terminals off 3. connection blocks from ecu 4. take 4 screws out 5. take chip out and replace with new now just the reverse. have i missed...

bought carbon ones... the little buggers are held in by gripper washers... & i havnt been able to prise a single one off yet... should i just dremmel the washers off !? :dunno also do you just use any glue to replace the heat foam back on !? :confused

hi mates... i recently bought a 2000 rsv and i've been thinking about changing the fairings and make new ones with modern design,but then i had a diferent ideia, i thought about using the rs125 06/09 fairing,the design is from aprilia and they look great. Anyone knows if the size of the 125...

Time to change my brake and clutch fluids as I have noticed that the feel at the lever is deteriorating rapidly. :eek: Anyhow, been reading up on this Dot 5.1 fluid and it seems to be rather well suited to our beloved RSV's. Anyone here using it and if yes have you noticed any distinct...