Second time out and more problems!!
- Thread starter windaelicker
- Start date
-
- Tags
- problems problems!! time
Help Support Aprilia Forum:
- Joined
- Aug 5, 2012
- Messages
- 24
- Location
- Cupar Fife
Rushed home from work last night...Borescope fired up and down the plug holes,Couldn't see anything obvious,couple of slight marks on the bore but certainly no gouges!!! Looks a lot better than my KTM crosser barrel.
Turned it over to check the whole barrel and all seems fine. Fancy wee mirror fitted to the borescope to check out the valves etc and it all looked fine too:thumbup
Changed all the plugs for the correct heat range and torqued them in cleaned plug caps and fired her up. Sounds ok.
Will need to take her for a run too see if everything is ok but i will wait for my seconhand cooling fan arriving just in case.
Turned it over to check the whole barrel and all seems fine. Fancy wee mirror fitted to the borescope to check out the valves etc and it all looked fine too:thumbup
Changed all the plugs for the correct heat range and torqued them in cleaned plug caps and fired her up. Sounds ok.
Will need to take her for a run too see if everything is ok but i will wait for my seconhand cooling fan arriving just in case.
- Joined
- Aug 4, 2009
- Messages
- 5,029
- Location
- Sunderland
All sounds good mate. I'm pleased for you.
- Joined
- Jul 24, 2008
- Messages
- 999
- Location
- fife
ahm saying nowt 
- Joined
- Aug 5, 2012
- Messages
- 24
- Location
- Cupar Fife
It's all your fault ....if you had just sold me the bike this wouldn't have happened.
New fan on and working well,will change its oil and filter tomorrow then take it for a run.
New fan on and working well,will change its oil and filter tomorrow then take it for a run.
- Joined
- Dec 20, 2008
- Messages
- 5,708
- Location
- Usually at the top of the apple tree.
ahm saying nowt
Whit's awe this then jiner???
- Joined
- Aug 5, 2012
- Messages
- 24
- Location
- Cupar Fife
Not taken the bike out yet,drained the oil last night and went to replace the filter but I had the wrong length...
Got the right one today genuine part,put it on filled up with oil and started up...
Lo and behold the shitting filter cover is seeping at the gasket!!!
Everytime I touch this pigging bike something goes wrong.
Got the right one today genuine part,put it on filled up with oil and started up...
Lo and behold the shitting filter cover is seeping at the gasket!!!
Everytime I touch this pigging bike something goes wrong.
