You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, and others.
YOu know watt? My tuner buddy said the jury is out, we discussed theory. My tuner says the snork takes on the Bernoulli principal. Adds a push as that tube is small in diameter. That was a good point brought up, but he is missing the concept I proposed. I rode over there, took him to lunch, we got heavy into it. I must be seeing something wrong then. I said, I don't care what hole beings the effect, it's going to bernoulli anyway, right? What begins in motion, bernoullis it too. I say it is just another proportion in a square hole, not a round hole. Though the volume changes and now the controversy.
Oh, does the bike spin on manhole covers? Yes, got caught over one at a light was the squirt away = No snork. Take off in the lower lag? Yep, that did make the bernoulli lag. But once the effect set in = Totally torquey; different bike. Smoother? Yes. Quicker once the benoulli kicks in? And how! Was I mapped in a hack coming home, stock running there in the afternoon? One mod at a time. Yep, I have one nice runner = No matter how I describe it... It's getting there. Map2 will be next week's test session.
I ran the hack that was de kind @ 14.1:1 ~ 14.5:1 AFR going home. 15:1~14.7:1 going there; was when I notice how it [snorky] smoothed out the pulses. Same effect as the other bike once the air cleaner/snorks are modified. Did I lose HP? That was our closing discussion. We can go back an forth on this. We need it up on the dyno and now uncork the snork to find out.
This is one [mod] post after another. This is raw data as it happens. You have to pick up what you can. I'm not going to explain the complex. YOu just watch the mods and If I fail, you'll know. Right now. I had a successful mod event. A working dash with a push of button, I can read water temp and all if necessary. I clear the SERVICE code, my water temp runs the exact same number with different AFR's. GETIT?
WATT is up with that miss at 3-4K recall already. I'm back to playing with the air screws to get that low stumble cleared. Then it can pick up a wheel down low. The snork is WOT I suspected it to do. Lag and run smoother but work upstairs more. That air screw adjust is all abouthatspit.
My bike is flawless. My bike runs flawlessanspitting. I'm a happy camper and you are crying the blues? I don't get it. These are old standby mods, no? Everyone goes after this one, right? I showed nothing new.
Oh, does the bike spin on manhole covers? Yes, got caught over one at a light was the squirt away = No snork. Take off in the lower lag? Yep, that did make the bernoulli lag. But once the effect set in = Totally torquey; different bike. Smoother? Yes. Quicker once the benoulli kicks in? And how! Was I mapped in a hack coming home, stock running there in the afternoon? One mod at a time. Yep, I have one nice runner = No matter how I describe it... It's getting there. Map2 will be next week's test session.
I ran the hack that was de kind @ 14.1:1 ~ 14.5:1 AFR going home. 15:1~14.7:1 going there; was when I notice how it [snorky] smoothed out the pulses. Same effect as the other bike once the air cleaner/snorks are modified. Did I lose HP? That was our closing discussion. We can go back an forth on this. We need it up on the dyno and now uncork the snork to find out.
This is one [mod] post after another. This is raw data as it happens. You have to pick up what you can. I'm not going to explain the complex. YOu just watch the mods and If I fail, you'll know. Right now. I had a successful mod event. A working dash with a push of button, I can read water temp and all if necessary. I clear the SERVICE code, my water temp runs the exact same number with different AFR's. GETIT?
WATT is up with that miss at 3-4K recall already. I'm back to playing with the air screws to get that low stumble cleared. Then it can pick up a wheel down low. The snork is WOT I suspected it to do. Lag and run smoother but work upstairs more. That air screw adjust is all abouthatspit.
My bike is flawless. My bike runs flawlessanspitting. I'm a happy camper and you are crying the blues? I don't get it. These are old standby mods, no? Everyone goes after this one, right? I showed nothing new.
Hey, go to youtube... Type in >>> Tuono Troubleshooting <<< w/outhe arrows. This is more how the pissayshit. And obtw, if that is you and you stood in front of it, not my fault you think that is you. And I am not addressing anyone in particular. Strictly genericranialanguage. LOL