- Joined
- Apr 22, 2020
- Messages
- 6
- Location
- Dublin, Ireland
Hi,
Question on the Tuono Gen 2 dog bone.
I’ve recently picked up a very clean 2010 Tuono with 9000 miles. Its obviously been meticulously looked after but the shop couldn’t tell me for certain if any maintenance had ever been carried out on the linkage, so I’ll presume it hasn’t. Although it seems to me to be operating perfectly and rides well with no issue.
After reading up on the dog bone issue on the Tuono, and as I’m not competent nor confident enough to tackle this maintenance myself, I’ve ordered a racetorx kit which comes with
x1 Racetorx Uprated shock linkage dogbone
x2 Titanium Grade 5 Bushes
x4 2012 Drawn Cup Needle Bearing (SKF)
x4 20x26x4 Metric Oil Seal
Some chats also recommend upgrading the triangular side plates too? Is the kit above enough to solve the problem or should I order new triangle plates, or anything else for that matter?
Thanks,
Scoob.
Question on the Tuono Gen 2 dog bone.
I’ve recently picked up a very clean 2010 Tuono with 9000 miles. Its obviously been meticulously looked after but the shop couldn’t tell me for certain if any maintenance had ever been carried out on the linkage, so I’ll presume it hasn’t. Although it seems to me to be operating perfectly and rides well with no issue.
After reading up on the dog bone issue on the Tuono, and as I’m not competent nor confident enough to tackle this maintenance myself, I’ve ordered a racetorx kit which comes with
x1 Racetorx Uprated shock linkage dogbone
x2 Titanium Grade 5 Bushes
x4 2012 Drawn Cup Needle Bearing (SKF)
x4 20x26x4 Metric Oil Seal
Some chats also recommend upgrading the triangular side plates too? Is the kit above enough to solve the problem or should I order new triangle plates, or anything else for that matter?
Thanks,
Scoob.