Digital Dash Functions

Thought this might be of some use to people as it is for me....for some reason my bike came with service history but no manual



Resetting the service light

Key on
Press Lap and R for 5 seconds

Switching KM/H to MPH

Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice

V max

Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds

AVS (Average Speed)

Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds

Redline threshold (engine off only)

Press C, release, and press again
Release C when desired RPM is reached

Battery voltage

Press D once

Setting hour

Press D twice
Press LAP until desired hour is reached
Press D to confirm

Setting minutes

Press D three times
Press LAP until desired minutes is reached
Press D to confirm

Setting °C or °F

Press D a fourth time
Press LAP to alternate units

Chronometer (Lap Timer)

V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D

You can download the manuals for all models here http://www.serviceaprilia.com/Index_f.htm