Aprilia RSV/ Tuono Gen 2 performance filter kits

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Tash

Tash

Joined
Nov 29, 2010
Messages
311
Location
County Durham
Right guys as per the title, these filter kits are for the Gen 2 RSV and Tuono. The kits give very good power gains and an induction roar that is thoroughly addictive. With the kit you will get a high gloss carbon fiber base plate, pipercross air filter, oil breather filter a longer breather pipe and all fittings and hose clips needed. The cost of the kit is £170 + £6.99 delivery, in stock and ready to go.
RSVGen2-3.jpg

RSVGen2-2.jpg

RSVGen2-1.jpg


Cheers
Mark
 
Last edited:
Awright Tash min....how do these mount...I take it uses the existing airbox mount bolts to the top of the intake manifold?
 
Yes mate you remove the existing airbox and screw the base plate to the throttle bodies using the same mounting holes, realy easy to fit and comes with full fitting instructions.

Mark
 
You really do need these on your T chaps. Baaaaaaaaarrrrrrrrrrrrppppppppppppp:thumbup
 
I've got Arrows fitted + Map2 done. Does fitting this kit need any more tweaks? Also, what's the approximate gain in power?
 
Just had custom maps, Power commander, 15-42 sprockets, suspension tweeked & K&N's fitted yesterday. Is there ever an end to the shopping list????
 
Tony at Moto Corse Wrexham said the rear spring needs replacing, any suitable spring relacement to recomend. & No I can't afford an Ohlins shock yet.
 
these are great, boost in power and as Nob says an addictive induction roar ( specially on full chat ) !!
 
For an absolute nob (no offence Nob lad) when it comes to following fitting instructions or using any kind of tools how easy a fit is it?

Like the idea of induction roar.....scooby esk or what??
 
It's a bbbbbaaaaaaarrrrrrrppppppppp growl, like feedin a hungry nesbit a deep fried square sausage after a week long bender. Done in an hour or so, piece of pish with basic spannerers. It's a friggin no brainer.
 
So what are the pawar gains with this mod can we borrow one to test on the Dyno , most air box mods we have tested havent given eney pawer gains what so ever ,they just make a lot of nios . and put oil all over the engin wen the crank case presher bilds up and pushes it out of the breether , Messey and bad news with it all over your back wheel and Tier .
 
You tart styler. 5k on this T and 1300 on the Fuono and no blow off yet. Do it right, do it once an all that eh !
 
freestyler said:
So what are the pawar gains with this mod can we borrow one to test on the Dyno , most air box mods we have tested havent given eney pawer gains what so ever ,they just make a lot of nios . and put oil all over the engin wen the crank case presher bilds up and pushes it out of the breether , Messey and bad news with it all over your back wheel and Tier .
Click to expand...

As nob said the gains are around 3-5bhp top end 4-8 mid range and a smoother delivery, as for getting oil all over if your oil is at the correct level then you wont have any problems, I have run one of these kits on my gen1 for over 2 years and never had any issues.

The fitting of the kit is very simple, remove your existing air filter and replace with the carbon plate, but full instructions are included.

Mark
 
does this replace the whole air box or do you have to use the original airbox lid
 
Just spoken to Mark ( top guy) filter kit ordered and on its way. Will let you know how it goes .

jason
 

Similar threads

CHAPLAIN1
2002 Aprilia Mille R track/street many upgrades!! SOCAL
Replies
4
Views
1K
CHAPLAIN1
CHAPLAIN1
Tash
Gen 2 Ohlins shock
Replies
1
Views
842
Tash
Tash
Tash1
Gen 2 Ohlins shock
Replies
1
Views
720
Tash1
Tash1
M
Carbon fiber cooling pipes from Sprint Filter
Replies
0
Views
1K
maxbiaggi
M
aka_Gilo
Samco hose kit & hose clamps for Gen 2 Tuono
Replies
4
Views
1K
brooksy
brooksy

New Posts

Back
Top