wheel

hey guys well here is my bike Now i saw this on ebay and thought the wheels made the bike look alot better :inlove 2 questions what colour should i go for? How hard is it to do? :confused :dunno

I am about the get my wheels back from the powder coaters, and I am going to put new wheel bearings in front and back. The question is what is the best method for doing this, with shagging the wheel housing or the new bearings?

Are any special tools required to tighten front wheel spindle?

Ive got a rear paddock stand and no abba stand. Its just to get the front tyre changed and i dont fancy getting cold. how could i do it?????? and any tips. Cheers Tim

Are these any good? I don't fancy OE prices so let me know if anyone has tried them!!!:confused http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:IT&item=330253713317

Hi all, saw this, have a look, bloke says the tyre is nearly new, think it was a Bridgestone..... http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=190269797329&ssPageName=ADME:B:WNA:GB:1123

Should there be a 30mm spanner in the tool kit to get the wheel bolt undone? I've gone out to do it and now can't as I only had a big 32mm spanner for the rear, same size as the one in the tool kit and I assumed they'd be the same size! :angry

OZ front wheel in blue color for mille 99-02 wanted. PM or [email protected]

Hi there Does anybody happen to have a rear wheel spindle and adjuster blocks for a 2001 rsv mille please, i believe that the models between 98 and 2003 are compatible but im new here so dont quote me!! Let me know how much you want if anyone has a spare, id be very grateful. Cheers.

Hi there, As promised here's the results of my trip to see Richard at Dynojet HQ for a re map on the old 08 motor. When Richard started it was 118BHP at the rear wheel with 68lbs of torque - Now its 126 BHP at the rear wheel with 74lbs of torque. But the big issue was the air fuel ratio which...

I'm getting a repetitive 'clunky' type noise from the mid to rear of the bike. At first I thought maybe the chain was a bit dry and a sticky link was to blame but having lubed it this doesn't seem to be the source of the noise. With the bike on a paddock stand the chain seems fine however I...

Anyone know for certain if a rear wheel of an '01 Falco is the same as the one on my '01 Mille? Looking for a (very) cheap spare for my upcoming track trip. Cheers 'me dears.

If I buy a brand spanking new set of OZ wheels off ebay for my bike can I transfer the brake discs and sprocket straight on to the new wheels, or do I need to buy any thing else? I am thinking what is a sprocket carrier etc :thumbup

Hi, just fitted new chain and sprockets as recommended (16/44) but when its on paddock stand and i spin back wheel i hear a clonking sound even tho the sprockets look to be lined up correctly, i've heard mentioned it could be cush rubbers, any ideas ?

For an 04 RSVR...grey.......mines got a dent and cant find a repair shop local

And i mean SLIGHT......you hardly notice it, got my front tyre changed today and was told about it, they said it would be fine and the wheel balanced ok but i know its there and its bugging me SO ........ any idea where i can get it put right.....Somewhere in Bedfordshire would be...

ok guys here goes..... remember i bought a cat d 04 Factory, so serviced oils and lubes yesterday today decided to take front wheel out to inspect and greas and service brakes while cleaning the rim spinning the wheel i noticed bulge in the front wheel rim on the right, then noticed the same on...

I have just changed the rear wheel bearings on my RSVR and this is not a prefered method I would imagine, but...if it helps. Get two 10mm bolts, turn upside down and grind a key for the slots behind the bearing (Did quence them in water to harden them a bit). Put a couple of nuts on each end...

One thing I like to stand out on a bike is the wheels:unhappy, my Busa had orange, other bike had white but my Mille has grey. To make them stand out I was thinking of polishing the lips from the tyre to just befor the center.:smilie Now I have never done this before and would love some...

Thinking of having my wheels painted, as they have started to look a little tired. Does anyone know what the name of the gold that Aprilia use? And weres the best place to get some from? Cheerrrrrrsssssssssss