wheel

hi all looking for fly wheel retaining bolt 14mm x head if you have one call text 07847490156 thanks....

hi all loo king for fly wheel retaining bolt 14mm x head if you have one call text 07847490156 thanks....

hi guys cant get my flywheel off to replace my sprag clutch any help would be grate had hydrolic puller on it and it wont move

I was going to use this to replace the old wheels on my bike but ended getting red ones with new tyres instead. It is in used condition so not mint. A few minor paint chips but nothing major. Please see pics. Comes with rear disc( 1 bolt missing) and cush drive. Looking for £295 ovno delivered.

Yes I have that mundane grey (in my opinion) on my wheels. I was thinking of trying to spruce them up a little. Red with white rim. I think it just adds a little more depth to the overall look?

Please contact [email protected] Cheers!!!!

Hay Can any one help me on this I have just changed front forks for 05 radial Showa on my 1999 Mille I have the spacers 2.5mm behind the disc clutch side is fine but the brake disc on brake leaver side rubs on caliper eage It seems like the fork leg needs to go over towords the disc more I have...

Hi there can any one tell me where I can get the 2.5mm front wheel brake disc spacers so I can use radial forks? Cheers Bigkev

Can someone tell me what are the nut sizes for my 07' RSV 1000 R? I need to get my tires installed and trying to save money by taking the wheels off myself.

Hey, searched the forum for about 10 minutes to find some info, I'm sure this has been covered. But I'm looking to switch the rims on my 2004 RSVR to a different style as mine just have the plain flat black wheels. Will they fit? or will I need spacers or adapters for the axles or calipers?? I'm...

Took out plates to dull them down with wet & dry also put some 1mm washers on top of spring as been getting slip. Put everything back exactly as it came out in correct order and clutch quite stiff. Goes into gear but bike going no-where when clutch let out ?? diapragm moves and theres 15mm...

Guys i have this wheel spare and no longer need it. In good condition with only a couple of wee marks. Good bearings.* Looking for £60 + post of £10 insured.* I'll add a pic later.* Cheers.

Hi Chaps, Im hoping someone could point me in the right direction for some touch up paint. I need it for Brembo wheels on a 04 plate Gen 2 RSV, its a dark grey colour. Im aware Aprilia dont issue paint codes which just makes things more difficult when searching. Theres a few sellers on Ebay...

As the tittle says really, i own a Tuono R Gen 2 and would like to know what the top speed is limited to, and is this limited by engine rpm or rear wheel rotation, or something else, if it's rpm, what rpm is the limit and in what gear, the reason i ask is because at the moment i have 15/40...

Does anyone know the RAL colour of the Blue Oz wheels on the 07 Factory. scuffed them and neer tho have them re-powdercoated. Cheers Col

Hi, Just been out to re-tightening my chain, using a strait edge and a 30mm stock bar to allow for the 120-180 profiles, and i have come back in confused. Along the drive chain side it is perfect but along the other side there is a 10mm gap all the way along the front wheel. There must be a...

ok so i just swapped out my tires for some new pirellis. the front and back wheels went back on with ease. Then when i had it on the rear stand to check if the chain was running smoothly and wax it up, the chain kept skipping. I messed with the chain tensioners for almost 3 hours. It just seems...

Hiya Guys, I've a standard 2005 RSV-R with radial calipers but not Ohlins forks, can anyone tell me what front wheels are compatible or what I'd have to do to make any fit? Thanks, Nik.

Folks, I'm looking to replace both my front and rear spindle nuts on my 2000 RSV. They are both M25 x 1.50mm. However, almost everywhere I've seen selling them states the front one is 30mm socket sized and the rear is 32mm?. Why the difference in socket size if the actual nuts are both the...

when swopping brembo wheels for oz ones can you use the brembo spindles to fit on,is it just a case of changing wheels over..:biggrin