torque

Anybody know the settings for the pinch bolts ,top and bottom yoke on the Factory ( Ohlins ) model

any one got the torque setting for a rsv1000r 04 model front sprocket bolt rear sprocket bolts ? rear brake caliper front brake calipers rear wheel thanks saw a down load for a manuel somewhere

Hi all ( Well anyone that can help me ), I am looking to get hold of any kind of literature regarding the 'torque' settings for both the rear & front wheels on my 2005 RSV-R Factory ?? The only info in this regard I ever find is 2003 model and previous..... Its burning my head out now ! Having...

I am a hamfisted roofer and no doubt that im gonna strip all the ******* bolts etcetc

I have an intech vacuum controller lying in my garage ( used it on my old duke 748 ). Since it`s basically an adjustable vacuum valve , could i replace the one way valve in the clutch and have adjustable slippage on the clutch :dunno? It`s always nice to have a bit more slippage:devious I may...

hi does anyone know what torque figure to use for the bolts on the rocker covers? or where i can get a workshop manual that will tell me this and others?! thanks

Im about to change the oil in my RSV and thought it about time I bought a torque wrench. Ive heard they are a must for the Apes. I had a browse around the net but not sure what to go for. Having looked at the workshop manual for the RSV looks like I need one with a range of about 10 Nm (oil...

hi guys can some one please help .I am having trouble finding the correct torque setting for my front sprocket that i have just replaced :thumbup

does anybody know the torque settings for fork clamps on 02 rsvr (ohlins) thanks oh and front wheel spindle clamps or if somebody has any idea where I can download this from a website

does anybody please have the torque settings for my 2005 rsvr i need rear spindle ,front spindle and pinch bolts, and front calipers thanks in advance. dave :thumbup

Alright guys, Can someone out there give me the correct rear spindle nut torque setting please?? Ta.....................:thumbup

As above really guys, anyone know the correct figure for front wheel spindle nut? ??

crankshaft position sensor to alternator case - 8ftlb/11Nm (use Loctite 243) sprag clutch case to flywheel - 21.7ftlb/30Nm (use Loctite 648) flywheel bolt to crankshaft - 94ftlb/130Nm (use Loctite 648) stator to alternator case - 8ftlb/11Nm (use Loctite 243) (leave the Loctite to setup for at...

hi guys just about to change my front sprocket, i cant find the torque setting in the manual. any ideas. 2008 plate. cheers Nige

hello, this is my first post. just bought a 2003 mille r and spooned fresh rubber on the wheels. my bike came without an owners manual, but i wanna ride it today. anyone have the mille r torque specs for the front and rear wheels? i know the pinch bolts and axle bolt for the front will be...

Just bought a set of crash bungs from this guy (Race Supplies Direct) on Ebay. Tried to torque them to factory engine bolt settings but they wouldn't make it - looked like the bolt head was trying to pull through the washer. I emailed him and he got straight back to me with this: "Hello...

Just finished putting the 16t on the Mille and cant find anywhere the torque settings for the nut that holds the front sprocket on? :dunno Urgent help so I can finish it off for a spin tonight Cheers tim

hey y'all i've got a slow puncture on my front tyre and am trying to deceifer the torque values for removing the front wheel. The manual has slightly convoluted descriptions for certain parts. The main axle nut i got and is 80Nm but what are the fork leg pinch bolts known as? Or if someone...

Changed my front sprocket to a 15 t this morning but when torqueing the stud to 80 ft lb it felt like that poor wee bolt was about to snap so i stopped before the wrench clicked or the stud snapped!!! Did i have the right setting or have i overcooked it???? Gearing feels alot better now just...

Partway thru installing my 520 Vortex conversion kit. At point of retensioning the (5) five Drive Pins & Nylocks, but cannot find a torque setting anywhere for these. Are they the same torque as the Brake Disc Bolt @ 30Nm plz...if anyone knows this setting can you please post for me. Kind...