torque

Does anyone know what torque the rear spindle nut should be tightened to?

hi.nobody knows how many newton tightening the conrods to crankshaft? for mille 2008?

what is it hand book says 120nm Haynes manual says 80 to 90 nm as there has been a lot of rear wheel bearings fail due to been to tight :crazy

Morning guys, Just changed to a 15 tooth front sprocket , before hurtling down the highways & byways , could one of you gents provide the torque settings for rear wheel nut & sprocket bolt, Regards:cheers:cheers

Adjusted the chain for the first time on Saturday, the rear axle nut was ludicrously tight. The swingarm actually relaxed so much it moved a fair bit along the paddock stand bobbins! I've read 120NM is recommended by Aprilia, but some people say that's too much and use more like 90NM? Also, I...

Was going to put this on ebay, but thought I'd try here first, just in case someone is looking for a fairly decent torque wrench. It's a 3/8 drive, so perfect for bikes. Very good working order, few scratches here and there, but generally in good nick. Lifetime guarantee on all Hafords...

Was going to put this on ebay, but thought I'd try here first, just in case someone is looking for a fairly decent torque wrench. It's a 3/8 drive, so perfect for bikes. Very good working order, few scratches here and there, but generally in good nick. Lifetime guarantee on all...

Guy's does anyone know what the torque settings are for the front and rear brake discs?

Just finished swapping some shims over as both inlets on the front were over by 0.03mm. Was able to swap one over and bought the other from Griff (great service - thanks). Took two attempts as I hadn't calibrated the micrometer before using it:roll the first time. Now have everything back...

Hi guys, Taken my wheels off (2003 RSVR) to have new tyres fitted, and seem to have lost my Haynes manual. Can someone please tell me what torque setting I need to do up the caliper mounting bolts (radial) please? Cheers.

hey guys anyone know the torque setting for the radial brake caliper bolts on a 08 plate ? cant see it in the **** manual

Just taken delivery of an Oberon slave cyl. Will be fitting this evening. Anyone know what the correct tightening torque is for the banjo coupling. I can find values for the mounting bolts but not the banjo.

What is the correct torque setting for oil drain plug, can't seem to find it in the manual. Cheers

Anyone know the torque settings for the bolt and the bleed nipple that mounts onto the clutch slave? Ta

Chaps, a bit of a heads up on the wheel torque settings. I got some new tyres yesterday and on fitting the front wheel I spotted a crack on the fork bottom, right over the pinch bolts. Their has only ever been myself who's taken the front wheel off this bike and I've torqued it correctly...

Howzit peeps, hope all is having a good weekend out on there T`s. I have just got some R&G crash bobbins, the front ones. What i dnt know is if there is a torque setting for it when i tighten it up? Aswell as anay advice on fitting them what i should look out for? Thanks and see u on the...

Read its 50nm with blue thread locker.....seems really low to me:confused

Hi folks can anybody please tell the corect torque setting for the front and rear wheel spindles on my 09 rsv:devious

as title says was just wondering if any of you guys knew what the correct torque setting is for my rear wheel spindle bolt is the bike is a 2003 mille thanks rick.

anybody able to tell me torque settings for top/bottom yolks cheers dave