Yamaha solenoid
seriously i've had all sorts of startign problems as you all know, got my new yam solenoid today, put it on and started her 4 or 5 times in a row and fired first time
well worth the 28 quid
one happy chap
A friend of mine mentioned to me that he has recently done the "Brown connector mod" on this 06 RSVR as his has burnt out, it now starts alot better.
Can this mod be done on the earlier RSV ?, anything to increase the voltage when starting has to be good thing on these bikes !!!
Having got to the stage where I was getting a bit pi$$ed off with bleeding the back brake and considering spending quite a lot on some rearsets I thought I'd give an idea a go first. The good news is that it appears to be working. I bled the rear brake a while ago and within 4 rides, 400 - 600...
Right I was getting a little frustrated today so I thought I would pull open the RSV Mille 99 to see what may have been done.
First off I checked the cable going to the ecu, yep it had been cut.
Next step while I was at the ecu I disconected it, it has previously been opened.
I took a pic...
Badger I've started this airbox mod following your instructions, and got a question. How hard should it be to lower the tank over the foam as mine seems really tight and started to pull the foam away from the lower airbox :dunno so I stopped before it ruined it all. Will it be ok when it's all...
Well folks i went out for the test ride today and only planned on an hours worth of riding but it rolled into 3 and a full tank of fuel as well :doug The air filter conversion has done wonders to the performance and the induction noise is so addictive :thumbup Sounds like a real racing aprilia...
gday all,
im installing LED tail and front indicators,and i have to mod the flasher unit to keep normal flashing rates,firstly where is the flasher unit,and secondly has anyone done this mod,i have an aftermarket fasher unit that came with the lights,it says some bikes its a plug in,and other...
Right.
I have had many questions asked to me about this and different opinions about it so I thought I would start a topic just about it.
Can anyone explain what the flapper does, why it was installed by Aprilia if it runs better without it, how to do the mod and any problems or comments...