This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cutting

  1. M

    Cutting out when applying throttle. 2004

    Hi guys, Really hope someone can help. Symptons are, when I go to accelerate away from a junction, the bike occasionally cuts out. So before Ive even let the clutch out and applyed throttle, it just dies.. The bike will start instantly off the button. It can even happen if Im still rolling...
  2. M

    Engine Cutting Out

    Advice please. I have an Aprilia RSV Factory 05 reg. My bike got knocked over on its side stand and suffered very minor cosmetic damage but has developed some faults. 1. Got no speedo now stays at 0mph and trip and odometer does not go up? (think thats just the sensor) 2. When slowing...
  3. Graffi

    Rsvr 2002 cutting out

    Hi all, I some help please.... RSVR 2002, power commander and chip. My rsvr 2002 has started cutting out ....it's fine on tick over never Misses a beat. I'm riding along and it is like someone has switch it off for a second then it's back to life. I've changed side stand sensor, tilt...
  4. M

    RSV Gen 1 Tuono - Keeps cutting out

    Hi All, Thought I had cured this problem but alas it's back. Bike rides perfect but for no apparent reason today after riding over a 100 miles of a Sunday blast with my mates the bike cutout leaving me stranded. This was happening intermittently for a few weeks & after reading a bit about...
  5. VtwinFTW

    Cutting mufflers?

    I'm picking up a 2005 Factory this week. It has a really nice arrow exhaust on it but the mufflers are gigantic. Very appropriate for the period in which this bike was made but a bit much by today's standards. I'm wondering if anyone has any experience with cutting the mufflers to make them...
  6. tim bently

    re my rsvr factory 04 cutting out

    does anyone know exactly which or where the relay is for the cooling fans, have swopped them around at the front left and right side and made no difference also, at what temperature the cooling fans should cut in, being static, I have seen +90c and they have not cut in! cheers, tim.
  7. tim bently

    rsvr factory cutting out!

    hi, I have a 2004 rsvr factory and had this millie from new. never come across this problem before and wondered if anybody has any idea's. took her out for a run yesterday and after about ten mins the engine just died! it was like the engine was turning over but no spark. as I was running just...
  8. Big Jessie

    Tuono cutting out on downshift,CURE IS HERE!!

    Hello boys n girls,as some may know my tuono(2007)has been cutting out on downshift third to second worst for some reason.The cause is a voltage spike to ECU ,the CURE is buy this diode (£1'78)p eBay item number 361491799458 it's a MUR420RLG on semiconductor diode bought from pcarena-bristol...
  9. Big Jessie

    Think cutting out on downshift

    Hello all,title should have read tuono ,my tuono sometimes cuts out when down shifting,Steve at rocket centre (top chap)says some but not all thinks have this fault and the solution is a diode which should be fitted inline using light blue and grey wire running into ECU,,he has been good enough...
  10. P

    Bike cutting out....fuel problem?

    Hi, in the middle of Spain at this moment, and have what seems to be a fuel problem. Bike is cutting out intermittently. It's a rsv Mille R (2000). Seems like fuel starvation, any ideas anyone? The efi message flashes when it happens.
  11. S

    RSV keeps cutting out when clutch is pulled in at a junction.

    2004 RSV Factory, when out riding today on several occasions when going down through the gears approaching junctions I had the engine cut out on me, what could be my issue?
  12. 8

    belly pan cutting for twin can conversion

    hi all as above says im doing my twin can conversion on my 1999 rsv mille. im unsure as to where to start cutting and was hopeing someone could point me in the right direction or even some pics would be great. i have on already the falco headers if that makes any differnce. many thanks ben :grinning
  13. G

    03 mille cutting out

    Guys , I have a 2003 mille with an annoying problem. under hard acceleration about 7-9k in 2nd gear the engine cuts out for a split second then comes back to life, just as if the kill switch is turned off and on quick . I have changed the side stand switch but still have the problem...
  14. col2506

    2001 rsv mille cutting out

    Hi guys, I need a bit of advice.. my aprillia keeps cutting out, it started by running a bit lumpy between 1500 and 2000rpm (missing) now its cutting out, i fully charged battery so its not that and yes i have petrol in her lol, it does start again almost straight away... whats the best thing to...
  15. S

    HELP ME PLEASE, 2000 Mille cutting out

    HELLO GUYS PLEASE HELP ME I'm at my whits end lol I have a 2000 X reg mille that has now got a problem, it keeps cutting out when I stop, I can be riding it fast no problem but as I get to a set of lights or have to stop it cuts out.. I turn it off with the ignition key and back on and she fires...
  16. D

    2004 RSV Cutting out

    Hi Guys, New here and looking for some help, my 2004 RSV starts revs to about 3k and then revs drop quick and dies, if you start it again it rev again and cut out again quickly, I've tried pinning the throttle and it'll try and rev but the rpms will drop again and cut out, I tried that a few...
  17. S

    02 Mille cutting out at 9500rpm

    Hi there, I've got an annoying issue with my 02 Mille, in that, when accellerating hard, when the revs get to 9500ish it feels like someones turned off the ignition for a scond, and then back on again repeatedly. The EFI sign flashes at the same time. A first i thought rev limiter, but thats...
  18. B

    PLEASE Help, RSVR Cutting ou

    Hi guys, I am new to this group. I have a 07RSVR and every time I am riding along an pull the clutch in the revs drop really low and the bike cuts out. It is ok to start with but then after a couple of mins it starts happening. I only just nursed it back home from work and had to keep the...
  19. S

    Key cutting.

    Can anyone on here cut me a key? Do you need the key to do it or can you do it from the code? Thanks
  20. T

    Key cutting and coding.

    Hi everyone, I have a fully functioning key for my '06 RSVR, cut and coded and have a new, genuine Aprilia blank key that I would like to have cloned, cut and coded. I'm finding it hard going finding someone in the North East, Durham, Cleveland, Tyne & Wear area, (I'm happy...