clutch

Hi, just want to confirm is there anything wrong with my bike. when bike is in neutral it moves free, but if you are in gear pull the clutch full, it got some resistance. but if engine is on, it moves freely. Is this ideal behaviour?

Hey guys! first post here! My names Aaron glad to be apart of the community. Recently had a slow dramatic slip resulting in a bent gear shift lever.. RIP I see that on AF1- they are sold separately without the toe tapping piece for over 70$..special ordered.. I could live with that.. But not...

Hi guys looking for a bit of help. I've got no feeling in the clutch at all. Got a factory racing clutch slave cylinder and recently changed the seals. Done the reverse bleeding and no leaks anywhere but still no clutch. Would the clutch master cylinder be going or something else.

hello to you all... 1st post from me as a new member.. just wondering where i can obtain the no 40 jet for the clutch on my 2002 rsv r millie and has anyone got advice on the front end that feels like its falling over going round bends.. new tyre on front Michelin 2ct did the same on the old...

Hey All, I'm looking to upgrade my braking with the RCS19 brake master cylinder, and looking to replace the clutch side as well with a matching Brembo product. Is there one, or do I just need to buy a foldable Brembo lever? Also, I've seen there's the RCS19 and 17. Any major difference between...

Hi all ive tried using search for this answer but lots of different answers. im under the impression ive got leave it 24hrs before attempting to start after fixed is this correct or can i try it see if starts and then leave it 24hr?? thank you

Hi Guy's Clutch is hard to pull in, it never started slipping, but has just stopped working and will not go into gear when running? Any ideas? Regards David.

Hi hope someone can help. Have an 01 rsv mille and last night as i went to go home the clutch gave up. No fluid in resevoir and i read the slave cylinders can be **** so i checked that and yep was leaking bad. Managed to make it so the leak is just a dribble but now the clutch only pulls...

Hi does anyone know where I can get a clutch master cylinder repair kit and the part number it would be for a 2001 rsv mille ? thanks in advance for any help .:nana

Genuine Aprilia sprag clutch bearing, only used for 800 miles as the engine was used in a special build with Gen 1 electrics so the whole flywheel was just changed over. This is like new with no slack whatever on the spring, looking for £65 including delivery. Cheers Mark

Genuine Aprilia sprag clutch bearing, only used for 800 miles as the engine was used in a special build with Gen 1 electrics so the whole flywheel was just changed over. This is like new with no slack whatever on the spring, looking for £65 including delivery. Cheers Mark

Hey Has anyone got an idea what you should be paying for a Clutch? Mine is definitely Slipping from 8000Revs under full throttle. It's a bit disappointing as it's only done 2500 Miles(2016) Joe

Mine seems to have sprung a leak... it's not the hose I replaced it. Common problem? Anyone got one to sell?

Hi guys and gals . Does anyone know who if anyone does a replacement seal for a ETV 1000 clutch slave cylinder ?:(

Hi gus and gals, I have a 99 rsv and whilst I'm waiting for a new starter motor I have a horrible feeling the sprag has given up too, now I don't mind bashing fingers and doing it myself I was wondering if anyone knew of a good place to get one, I've searched online and they are around £200...

Grey clutch lever, brand new in box. Open to offers, currently on eBay, item number 272523828542, thanks:thumbup

Hi guys, after a bit of advice and info...clutch slave is goosed on my T and was looking at replacing with an oberon model for circa £90. There are probably a few of you guys that have already done this mod and was just wondering how good they are really...any views much appreciated :thumbup cheers

Hello everyone. My bike seems to be following the standard issues list to the t lately and now I notice the clutch fluid leaking very quickly. I'd like to get this fixed but after researching more, I've found that the Ducati guys complain about their Evo slave cylinders leaking as well. Is it...

Hi All, After having bought back my old bike after 9 years .... (yeps, the same VIN), it's in need of some TLC .... She started ... not good, and the big 'Clunk' sound during the attempts, after some research determined to be the Sprag Clutch, Battery, Starter Relay Have disasambled the left...

Hi guys having a bit of an issue have replace the plates on my rsv Mille 2001, but could not get the pressure plate to sit flush, so I took the slave off fitted the pressure plate and then pushed the piston back on the slave and made it flush now cannot get the slave back on as the push rod is...