adjustment

Willing to pay freight from Overseas to Australia

Apologies if 'this topic has been covered before To adjust the exhaust from its original position, do you simply remove the one bolt form the rear bracket , or are there any more that needs to be removed

I have a 2016 Aprilla Tuono 1100RR I understand how to adjust the low beams but the highbeam seems to be at the identical height have not figured out if the highbeam can be adjusted separately or if the whole unit is adjusted with the one knob. It seems to me that if the highbeam was slightly...

Trying to set up the new lever angle on the V4, but the clutch lever triggers the TC - button. I've looked at moving the button housing, but before I start pulling it apart, has anyone else tried this?

G'day Capo Tourer's, was reading a renewed thread (on the other forum site...) about panniers falling off, and decided to double check mine. One was difficult to lock on without giving a good shove and a push-pull check. Anyway, there's good detail and photo's on that topic - worth a read (AF1...

hi folks , i have now got 19500 miles on the clock . the last recorded service was at 12000 miles just before i took ownership . in my opinion its starting to sound a bit " tappety " , despite oil change , etc at about 15000 miles . To get to the point has anybody any ideas on service...

Can anyone help? Occasionally the bikes stalls at lights etc (tickover), I think it needs just a little extra tickover (currently sitting at just over 1k rpm). Can anyone tell me if there is an idle screw and where it might be? :dunno

Hi all, I've been trying to adjust the angle of my clutch & brake levers (in line with the angle of my forearm) to make it feel less heavy on the wrists, but I've come across a couple of issues. 1) rotating the brake lever- after rotating the throttle clockwise to make space for lever...

Adjusted the chain for the first time on Saturday, the rear axle nut was ludicrously tight. The swingarm actually relaxed so much it moved a fair bit along the paddock stand bobbins! I've read 120NM is recommended by Aprilia, but some people say that's too much and use more like 90NM? Also, I...

Hi Has anyone had any trouble/issues with adjusting the chain or any helpful tips i.e. do i need to move the exhaust thanks

hi all, i have a 1999 mille and the tick over needs adjustment (raising) I've tried turning the adjustment knob on the right hand side but it wont turn, it feels like I'm trying to turn it against a spring and returns back to the same position without any change to the idle speed, what am i...

Looking at getting this done when mine goes in for it's MoT this coming month, what ball park figure should I expect to pay for the adjustments to be carried out? Ta. Gaz.

Yo Folks Can anyone tell me if there is any ride height adjustment at the rear of my '52 RSV-R, I would like to lower the seat a tad. Cheers

I had a new racing clutch fitted a few months ago as the old oem one started slipping at high revs, but now the biting point is right at the end of the lever...I know there hydraulic clutches with no adjustment? any ideas?

just done chain, noticed that its on the sixth marker on the block ,need to know how many marks there are to see how much life is left in chain cheers

Need to tighten the chain up but before I butcher owt is there a locking pin or summat, all my previous bikes had a split pin through a castle nut but cant see anything like it on my spindle nut, surely it cant just be a case of undoing the nut!

Does anyone running a 190/55 think lowering the bike a few mms would be beneficial in comfort? Sometimes I go on 2hour rides or longer and my back is killing me after. Maybe I'm just being a baby but I figured getting an adjustable link would level out to where it was originally. Just a...

fitted new clutch line,bled clutch but it is not clearing properly is their any adjustment. thanks dave

Hi Guys, The handbook says there is an idle screw for the 03 Edwards but I cannot find it......how do you adjust the idle? It's there (the idle screw) on the 2002 Mille as I can plainly see it and have used it before. Thx Mark

Bike on rear stand, I adjust roughly to be right then lock everything. Then I measure on bike stand and damn, chain goes tight. Instead of 25mm I get to 15mm. Also, when I lock axle bolt it seems left side of the wheel pulls for a 1mm rearwards tightening the chain although both screws on the...