fired up my v4 and left it ticking over for a few minutes tried to change from track to street mode and the bike died now I have a red triangle permanently on with the word service on the lcd the starter turns the engine over but the bike wont start their are no codes stored in the diagnostics, any body got any ideas thanks in advance
Joined Sep 2013
928 Posts | 75+
East Scotland
Joined Feb 2016
84 Posts | 8+
Cheshire UK
You need to reset the reset coupon... I had a none error code fault when the APRC stopped working. I reset the reset coupon, exited the menu and then switched off the ignition.
When I switched the ignition back on everything was working again..
If the above doesn't work the next thing to do is check the Stator has not burned out.
Have a look through this thread:
(Some of the mods and issues I have done/had on my Tuono)
http://tuonozone.com/aprilia-tuono-v4/11905-some-mods-issues-i-have-done-had-my-tuono.html
When I switched the ignition back on everything was working again..
If the above doesn't work the next thing to do is check the Stator has not burned out.
Have a look through this thread:
(Some of the mods and issues I have done/had on my Tuono)
http://tuonozone.com/aprilia-tuono-v4/11905-some-mods-issues-i-have-done-had-my-tuono.html
Last edited:
right then this is what I did I downloaded guzzidiag bought some data cables found 4 faults cleared them and it starts although the faults sounded serious on there own put together I think they relate to a weak battery, thanks to everyone for their input
Joined Feb 2016
84 Posts | 8+
Cheshire UK
