Tyre Valve Brembo Front Wheel

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
supertedlover

supertedlover

Joined
Mar 3, 2008
Messages
2,906
Location
Lincolnshire
Has anybody got one kicking about or know where i can get one :dunno

Nowhere round here has one and mine lets more wind out than i do after a night on the beer followed by a bhuna :biggrin


Thanks in advance
 
Take the valve out of a spare push bike inner tube. The valve bits are all the same.
 
the best thing you can do is go and have a lay flat valve fitted about a tenner a lot easier to put air in at petrol stations and won't deflate at high speeds like some of us have experianced in the past
 
Sounds like a plan, any ideas of somewhere to purchase such a wonderful technological marvel that is a 90 degree tyre valve?
 
If anyone who is going to the italian day in april wants me to get them one and save on postage, then i can get them from m and p beforehand and bring them down with me, thus saving you guys the postage costs, as they are only down the road from where i work, as are busters.

I'm spoilt for choice living here for big bike shops, hehe
 
Just got a phonecall from a local bike shop i rang yesterday and he said he might have one so am nipping there in a wee while. cheers boys
 
surely you can't leave them on as it will put the wheel out of balance anyway. The 90 degree screw on valve that i have states do not leave on.
 
1066RSV said:
Does anyone know offhand what size these are for the RSV:confused dont have bike at hand to look at.

Looking at these they come in two different sizes 8.5mm & 11mm.

Thinking of getting some when i get some top notch rubber.:pirate
Click to expand...

Are these universal fit ( allowing for different Dias obviously) as I enquired about fitting some when I last had tyres put on the SV.

Tyre fitter ( who seemed to know what he was talking about ) said " don't even think about it, Triumph who fit them as standard have wheels designed for them"

If he was :jack and they fit in standard wheels then I can see me having to spend again.

Ian
 
I have a set of those fitted. You wil need an extra o-ring fir front wheel because of the shape of OZ, but either they work just fine.
 
No idea... on OZ the problem is the shape of the rim there is not enough flat surface around the valve hole.

However, it can be fixed with an extra o-ring. It works for me.
 

Similar threads

L
no 40 jet for clutch on 2002 rsv r and front end falling over feeling.
Replies
2
Views
4K
Thestrangler
T
T
Gen 1 Tuono - Racing Spec for Sale £2400 o.n.o
Replies
1
Views
1K
RichinBucks
R
J
Custom ‘02 RSV Mille Race Bike
Replies
4
Views
2K
redratbike
redratbike
haggis
What tyre valve size for a Gen2 R model's cast wheel?
Replies
6
Views
2K
snowman
S
richmond rossi
I’m back, after coming off my Factory R few years ago 😖
Replies
2
Views
1K
richmond rossi
richmond rossi

New Posts

Back
Top