Side stand safety switch?

echelon · Sep 17, 2013

I have heard that a lot of the Honda switches will fit the Tuono, I have a Tuono 03 streetfighter and was wondering which will fit. I bought this switch as it looks almost identical even down to the plug 01 HONDA CBR1100XX SUPER BLACKBIRD SIDE KICK STAND SWITCH D2 | eBay any help would be greatly appreciated. I was also wondering what the green wire was for in the original set up? the brown and the black wires are for the contact or breaking the connection.

stress · Sep 18, 2013

the dashboard "side stand down" indicator, that's the green wire!

echelon · Sep 19, 2013

Cheers I found that out, when I reconnected everything it seems to be working in reverse. Put the side stand down and it will run, go into gear, light off. put the stand up and it cuts out, won't go into gear and the light comes on. I don't know if it's original but when I got the bike the safety light wire was disconnected. I tried reversing the brown and the black and it's still the same.

Uglyfatfook · Sep 19, 2013

My light used to come on when the stand was put up when I first bought the bike, took the stand and switch off to check it and realised the switch had been put on wrong and the locating pin wasn't in the right place.

Andywhedd · Sep 20, 2013

I cut mine out and bypassed it as it caused the bike to cut out randomly

echelon · Sep 21, 2013

I eventually figured it out two wires were originally connected, the third warning light was disconnected. Wires had to be wired in a certain order to work fully, the two wires used to close the circuit had to incorporate the warning light wire. The warning light wire had to run through the circuit as well.

Side stand safety switch?

Help Support Aprilia Forum:

echelon

stress

echelon

Uglyfatfook

Andywhedd

echelon

Similar threads

New Posts