no click 07 tuono

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Mar 2, 2011
Messages
7
Location
leeds
Have any of you lads had any electrical problems after storing your G2 tuono for a while. Pressing starter switch starts the fuel pump but there is no click from starter relay. Relay clicks ok when voltage is fed directly from battery and starter swich contacts are clean...can anyone help?
 
So you have tried bridging the relay?

The battery is ok?

Lots of posts about these problems on here and rsvzone so do a search
 
usualy low battery voltage
check your battery first with a load tester ,if not put a new battery on
these bikes wont even try if the battery voltage is low and they dont like being jump started neither for some reason !
 
starter turns when relay is bridged, battery is reading 12.6 v . what is in the circiut between the starter switch and the relay,i think i need a wiring diagram, havn,t seen one on these threads.
 
My battery when fully charged only reads 11.8 even though it's only a year old?

When I left it a bit over the winter it went down to 11.3 & started fine. When I'd left it too long I think it was on 10.6 and then the bike just told me to piss off.
 
You got an alarm? Part of that goes on to the starter relay.
 
does your dash and lights come on? im having a similar problem, new battery and when i turn the key i hear the fuel pump but theres no power to anything else! no clocks, lights ect.. meh
 

New Posts

Back
Top