My RSVR

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Nov 23, 2008
Messages
148
Location
newark
:biggrin Well starting to get things done now to my mille,done the gearing 16/44,next was the bagger air box mod,bigger battery,yam starter sol,fresh engine oil and bigger oil filter mod,irdium plugs,jet 40,new anti-freeze,gold mesh guards.Got fusebox to do synchronisation and co check but my bike is chipped which would not allow to adjust settings,so dont no what to do there.I do intend to put a power commander on at a latter stage when funds allow.
Just need to change fork oil and check valve clearance,but waiting for better weather and read up more on it first.
Picture065.jpg
Picture070.jpg
Picture069.jpg
Picture068.jpg
Picture067.jpg
Picture001.jpg
 
Looking good fella, you have done quite a bit since you got it, all the right things too:thumbup

I like those colours, had one myself exactly the same, here she is in the highlands of Scotland

SOT604%20049.jpg
 
Nice !! I had a blue flame , I went on a trip to France with badboy and his crew , it fell apart on the way home ! Couldn't handal the pace !! LOL sounded good thou !
 
Looking good fella, you have done quite a bit since you got it, all the right things too:thumbup

I like those colours, had one myself exactly the same, here she is in the highlands of Scotland

SOT604%20049.jpg

:thumbup Thanks mate,how do you rate the newer model to the older one.
 
That's nice!!!!Fav. colour and model.An Evo clutch slave improved mine no end(much lighter lever(needed shimmiing for more lift).A set of Helli bars(not so severe clip ons)and you can ride it for hours.Dublin to Portrush in one run last year.Round the Ulster GP road course).Enjoy!!
 
That's nice!!!!Fav. colour and model.An Evo clutch slave improved mine no end(much lighter lever(needed shimmiing for more lift).A set of Helli bars(not so severe clip ons)and you can ride it for hours.Dublin to Portrush in one run last year.Round the Ulster GP road course).Enjoy!!
:thumbup Cheers mate,some good weather would be nice so i can ride the thing.Wont to know if the jet 40 that i fitted done the trick.:biggrin
 
Lovely machine!

If you want to freshen up the carbon, remove, clean, lightly rub the whole surface once with very fine grade (600) wet/dry then spray about 4 coats of lacquer over it with about 30 minutes in between. Do not wax for a month or so.
 
Lovely machine!

If you want to freshen up the carbon, remove, clean, lightly rub the whole surface once with very fine grade (600) wet/dry then spray about 4 coats of lacquer over it with about 30 minutes in between. Do not wax for a month or so.
:thumbup Cheers,trip to halfords when weather picks up then.:biggrin
 
Back
Top