- Joined
- Apr 22, 2009
- Messages
- 273
- Location
- North Yorkshire
i am in the prosses of fitting a quickshifter on my 07 t and need to splice into the 12v feed to the injectors.
on inspection both injectors have a greeen/orange wire that has 12v when ignition on, so i would assume this is the one i am after but without digging out half the loom has anyone done this before and do both injectors have a common feed i can splice into (what colour and where?) or are they fed independantly?
the quick shifter module accomadates one feed in/out, if injectors are fed seperately is it still possible to fit?:dunno
any help very much welcome:cheers squates
on inspection both injectors have a greeen/orange wire that has 12v when ignition on, so i would assume this is the one i am after but without digging out half the loom has anyone done this before and do both injectors have a common feed i can splice into (what colour and where?) or are they fed independantly?
the quick shifter module accomadates one feed in/out, if injectors are fed seperately is it still possible to fit?:dunno
any help very much welcome:cheers squates
