- Joined
- Aug 1, 2015
- Messages
- 47
- Location
- derby
Afternoon gents, ive just fitted a new stator to the bike and i would like to put high temp grease in the block connector to the reg/rec , anybody know where i can get some?
I also re routed the cable, rather than going through the middle of the v as fitted at the factory, was loads easier and took about 10 mins as opposed to several hours getting it out!
(sorry if this teaching your granmother sucking eggs but it might help someone!) the next time i have to change the stator i think i might just cut the connector block off and pull the cable through rather than wriggle the block through the engine!
cheers
steelprunes
I also re routed the cable, rather than going through the middle of the v as fitted at the factory, was loads easier and took about 10 mins as opposed to several hours getting it out!
(sorry if this teaching your granmother sucking eggs but it might help someone!) the next time i have to change the stator i think i might just cut the connector block off and pull the cable through rather than wriggle the block through the engine!
cheers
steelprunes
