Eprom chip fitting

Garvey20031 · Jan 22, 2009

Need some help. Just received a nice new chip to fit and instructions.

Was wondering if anyone local fancied helping me fit this weekend. I know I will end up buggering it up and have no bike for work on Monday :thumbup

Cheers
garvey

Dolenc · Jan 22, 2009

Its realy not that hard, 5min is all you have to spend.

Find the ecu on the back side, unplug two connectors (one is large, one is not, so no problem which one goes back where

)

Put the ecu out, unscrew the 4 little screws, make sure you dont damage them otherwise you wont get them out

, just press hard and turn

.

Then open it, youll see the chip, on one side it has a mark, so you know how to turn it, remember where it is. Get it out with a flat screwdriver, stick it in on the side and turn it and then go on the other side, so that it will slowly pop out.

Put the new chip in, put everything back and thats it

danish ep · Jan 22, 2009

It really is quite easy - just take your time.

Make sure you observe which way round the chip goes, and which way in the replacement is going, and take care when taking the original chip out. Pry from one end with a small flat screwdriver, and then the other end so that it comes out at least reasonably straight.

Guide here for the Falco: http://www.geocities.com/sl_mille/dyno-install.html

patty · Jan 22, 2009

if your bikes up to it??

pop over and we will fit it in my shed if you dont fancy doing it your self??

just give me a hr's notice ,and i will make sure im in.:thumbup
pat.

Garvey20031 · Jan 22, 2009

patty said:
if your bikes up to it??

pop over and we will fit it in my shed if you dont fancy doing it your self??

just give me a hr's notice ,and i will make sure im in.:thumbup
pat.

Pat, I might take you up on that offer, working this weekend for the docs at night so might not be able to come saturday.

Might even feel brave and have a go my self. See if I can source a secondhand ECU first just in case

patty · Jan 22, 2009

garvey2003 said:
Pat, I might take you up on that offer, working this weekend for the docs at night so might not be able to come saturday.

Might even feel brave and have a go my self. See if I can source a secondhand ECU first just in case

well i got one of those here aswell if needed:devious:devious:devious

pat

Garvey20031 · Jan 22, 2009

Your just trying to get me to come down so you can nick my fairing lol

Thats cool Pat, Will let you know on Firday night if itys possible for me to pop down. your ounly 30miles away so not to long plus some nice road if the weather is good

patty · Jan 22, 2009

ok bud :thumbup

pat

Eprom chip fitting

Help Support Aprilia Forum:

Garvey20031

Super Garvey

Dolenc

Guest

danish ep

patty

Garvey20031

Super Garvey

patty

Garvey20031

Super Garvey

patty

Similar threads

New Posts