Electrical problems

billabong78 · Dec 12, 2010

I am rebuilding my T after an off which destroyed the whole headlight/dash/front fairing area.

I have fitted a new dash, headlights, indicators, and the 2 relays for the headlights.

The bike now starts and runs but i cant get any front lights or right hand indicator.

during fitting of the new bits i managed to blow the main 30amp fuse.

Can this have blown both headlight relays? if i bridge the relays i can get the lights to come on so the wiring seems to be ok.

Any ideas?

Aldo · Dec 12, 2010

If you bridge the relays and the lights come on does that not mean that the relays are shaged. Are you getting a supply from the switch side to the relay if you are then it's the relay if not then look at the switches. Do the same again and check your getting a supply to them. Jist keep eliminating every thing you can and I'm sure you'll find the fault.

Keith B · Dec 12, 2010

The crash may have damaged part of the wiring loom.Have a look at the loom where the main damage was and make sure there is nothing chafing/squashed or broken.You may need to splice into the outer wiring insulation to check.

Electrical problems

Help Support Aprilia Forum:

billabong78

Aldo

Keith B

Similar threads

New Posts