Dyno'd results with "Hooked" Air box

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Joined
Jan 14, 2010
Messages
64
Location
Uk - Cheshire
Hi folks, Received my Hooked Airbox yesterday and fitted it last night. Fit and finish is A1 :thumbup

Decided to go over to Quill Exhaust/ JB Racing in leigh to see how my 2000 RSV Mille was running with this fitted and a Laser race can.

The image below is my run, note the AF Ratio is way too rich. I will sort that with a Dr Rossi chip and a power commander. I would expect around 2 -5 BHP extra once the fuelling is correct.

Just look at the torque increase? And the sound..........Unbelievable.

MILLIE_2.jpg



We also compared my bike to a w reg standard machine to see a good comparison of the airbox with and wothout. Image below mines in red standard bike in green.

MILLIE_1.jpg


All i can say is a big thanks to Craig and if you have not got one of these kits you dont know what you are missing. Cheers
 
Last edited:
Why a PCIII when you are also getting another Eprom? Personally I never felt the need for a PCIII afterI fitted a decent Eprom. (well actually I wanted to buy a PCIII but just because there was nothing else left to change on my bike... :D )
 
Im under the impression the EPROM wil come with as good a match to my bike as possible, then i can fine tune the whole set up with the PC3?
 
pc3 is the last thing you need to finely tune the fuelling as much as possible to your set-up,a good ep-rom gets it near as but obviously every bike is slightly different
 

New Posts

Back
Top