dyno set up costs

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
F

factorydude

Guest
hi guys any one have prices for dyno time to set up a pc3 on a2004 factory with akra pipes and k&n filter. the bike is running in mode 2 and iam after getting a custom map done. And does any one no anyone in the northeast i can take it to to do this

cheers
 
factorydude said:
hi guys any one have prices for dyno time to set up a pc3 on a2004 factory with akra pipes and k&n filter. the bike is running in mode 2 and iam after getting a custom map done. And does any one no anyone in the northeast i can take it to to do this

cheers
Click to expand...


I dont know where you are in the North East but If I was having that sort of Job done I would have no Hesitation in going to Malton and Having it set up By John Warrington.

http://www.jwmotorcycles.co.uk/

Genius / Hero / Expert you name it...

His shop is a Proper Bike shop and he uses a Dynostar setup. He will make your bike Sing !

Cost wise No idea he wont be the cheapest but he is one of the best. I spent a couple of hours just talking with hime last summer when I took my Busa down there. He really is a lovely Guy.

Tell him Eeza sent you for a Discount :D
 
Had mine done at Gt performance Plymouth £180 & £20 for TB balance,took about 6 hours to do properly,part throttle settings etc,very pleased with the result,but not near you,try Griff ,I bet he can recommend someone up your way
 
Factorydude

If your comin to Malton ....... you'll be sorted with a custom map for around £130 .... Here's the place to go www.dynobike.co.uk

The guy did a fantastic job on both my bikes ...... check out the website then give the guy a call ..... he'll tell ya all the info you want over the phone.
 
I paid £165 all in, about 1.5-2hours total, up in Scotland though......:thumbup
 
Malton sounds like a plan, could do with getting mine checkd out, Helmsley tt there, and hopefully much faster back..lol

Will have to look in to it..
 
factorydude said:
hi guys any one have prices for dyno time to set up a pc3 on a2004 factory with akra pipes and k&n filter. the bike is running in mode 2 and iam after getting a custom map done. And does any one no anyone in the northeast i can take it to to do this

cheers
Click to expand...

FW Developments in Garstang is where i take mine mate, highly recommended:thumbup
 
Chris gunster in Grimsby is who i think iam taking mine too but am listening to you other guys, malton not too far for me either
 
any one know anybody down south thats worth a visit??

as i want to get mine all set up nicely.

cheers
patt.
 
We do them here for £160 does take a long time to do em properly though!

dont let anyone tell you different guys 3 -4 hrs minimum!

hope this helps!

Griffer!
 
oli said:
Malton sounds like a plan, could do with getting mine checkd out, Helmsley tt there, and hopefully much faster back..lol

Will have to look in to it..
Click to expand...

I would if you have a zorst or Airbox mod.

John really did go into a lot of detail and because I was interested he just kept on going. Its not Just about headline numbers, its how the delivery and performance is through the rev range. Let's be honest, how many of us Ride above 75% throttle in normal road riding ?

He will give you a SAFE and strong tune right up the range and you really will notice the difference.
 
yeah mines got an evo air box, pc3 usb, stubby can and aparently different throttle boddies?? not sure how or who set it all up befor i got it..
 
oli said:
yeah mines got an evo air box, pc3 usb, stubby can and aparently different throttle boddies?? not sure how or who set it all up befor i got it..
Click to expand...

Standard then eh Oli :D,
 
Theres a bloke in Doncaster called Trevor Wilson who has his own dyno and can set up anything see his website www.trax-dyno-centre.co.uk (its got his details on but I don't think its fully completed yet) for more details. He set up my 02 mille R with a power commander and it is awesome now! If anyone is ever going to Cadwell on a trackday let me know cos I'm there a lot of the time and you can see how mine runs!!!
 
moggi was on about going to caddie on 30th march Daz, im just waiting to see if i can get a bike to ride.


Griff - Set TB up before fitting PC or after ??
 
supertedlover said:
moggi was on about going to caddie on 30th march Daz, im just waiting to see if i can get a bike to ride.


Griff - Set TB up before fitting PC or after ??
Click to expand...

Defo before mate!
The throttle body sync will smooth out the bottom end of the fuelling like butter!:devious

then we'll have a sound solid physically correct foundation to build off!

ive come over all excited cos of the good weather and talk of track days!!!:doug

Griffer!
 
STL Defo let me know if you book and I'll be there! It'll be good to swap notes and knowledge! Am thinking of going next Friday (13th with No Limits) if the weather picks up!?!?!? :doug
 
Am working next fri but will keep you posted about 30th, i will be there with or without a bike . :thumbup

Griff, my bike is coming to you mate, no diggity :pirate
 

Similar threads

leslie
Power Commander 5
Replies
0
Views
1K
leslie
leslie
W
Anyone up for a swap...??
Replies
0
Views
1K
wirefan
W
W
Newb from Cheshire
Replies
3
Views
1K
wirefan
W
CHAPLAIN1
2002 Aprilia Mille R track/street many upgrades!! SOCAL
Replies
4
Views
1K
CHAPLAIN1
CHAPLAIN1
J
Custom ‘02 RSV Mille Race Bike
Replies
4
Views
2K
redratbike
redratbike

New Posts

Back
Top