This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Digital Dash Functions

Joined Jan 2012
145 Posts | 0+
Cornwall
Thought this might be of some use to people as it is for me....for some reason my bike came with service history but no manual :(



Resetting the service light

Key on
Press Lap and R for 5 seconds

Switching KM/H to MPH

Key on
Press A about 5 seconds until blinking
Press B to change unit of measurement
Press A for 5 seconds to confirm choice

V max

Uses trip odometer #1 (the odometer displayed during instantaneous speed)
To reset trip odometer #1 press R for 2 seconds
To display V max and distance of trip odometer 1 press B for 2 seconds
To reset V max press R for 2 seconds

AVS (Average Speed)

Uses trip odometer #2
Hold down B for 2 seconds and then press again
AVS is displayed along with distance of trip odometer #2
To reset both AVS and trip odometer #2 press R for 2 seconds

Redline threshold (engine off only)

Press C, release, and press again
Release C when desired RPM is reached

Battery voltage

Press D once

Setting hour

Press D twice
Press LAP until desired hour is reached
Press D to confirm

Setting minutes

Press D three times
Press LAP until desired minutes is reached
Press D to confirm

Setting °C or °F

Press D a fourth time
Press LAP to alternate units

Chronometer (Lap Timer)

V max, AVS, and trip odometer #2 no longer function in this mode
Press LAP and within 0.7 seconds press D to enter chronometer mode
To start timing press LAP and release immediately
To store a lap time press LAP
To display lap times press B
To cycle through the stored laps, press LAP
To reset memory press A and LAP for 2 seconds
To leave chronometer function press LAP and D
 
×

New Posts