This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Diag -1, 0, 1? Bike starts but won't idle? Please help!

V

V_senna

Jumped started the bike as the battery is knackered, and it fired up right away, after being stood for roughly 4 months due to crash, one of the radiators starts leaking so I need a new rad,

But it wouldn't idle, if its not started it reads -1, once its started it reads either 0 or 1, and I have to hold the throttle to keep the rev's up otherwise it cuts out straight away.

Any ideas?
 
thats your TPS - you'll need to loosen it and set it - and then retighten - fairly straight forward.

deacs :thumbup
 
those codes are fine and don't mean anything relating to the problem, try Deacs TPS adjustment
 
Those codes may suggest TPS but they seem to come up at the least provocation so can be a bit of red herring - I was getting the same code every time mine cut out with its melted fusebox!
 
×

Similar threads

N
Diag code 11 & 12 gen 1 Mille
Replies
2
Views
420
Chumneywarner
C
B
Aprilia tuono 125 won’t start
Replies
0
Views
391
BikeChickMomo
B
A
RSVR100R - Won't start - any advice welcome
Replies
27
Views
8K
arsvlad
A
J
rsv idling fine but dies on revs
Replies
16
Views
2K
justdan
J
B
04 RSVR won't idle below 2,000 rpm
Replies
18
Views
5K
dog78
D

New Posts