Black lever

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
J

Jussi

Guest
Just bought them from eBay, however, the clutch lever when you take the thing off comes with a "spine" that pushes the cylinder. The spine or spike is made of brass and sticks so heavily in the old lever and i do not want to brake it.
Went trough the parts fiche but was unable to locate the lever "nut" and the "spike" part numbert.
Anyone done the same pls. help...


Cheers
 
I tried to get one about a year ago when I got my pazzo levers, cos some bright spark knackered the allen screw in there, but when I spoke to a dealer they told me I would have to buy a complete lever set as you can't buy just the push rod.
Your best bet would be to get in touch with a breaker and get a second hand one
 
Mate throw them in the bin, i bought some of them and you have to file loads out the back of em to get them to fit properly, if you dont file them right the brake light is on all the time and worse than that you lose all brake feeling and they could stick on, took me about a day to gat mine to fit and work properly, lifes to short mate :thumbup:thumbup
 
Jussi said:
Just bought them from eBay, however, the clutch lever when you take the thing off comes with a "spine" that pushes the cylinder. The spine or spike is made of brass and sticks so heavily in the old lever and i do not want to brake it.
Went trough the parts fiche but was unable to locate the lever "nut" and the "spike" part numbert.
Anyone done the same pls. help...


Cheers
Click to expand...

If you look mate the pin also has a small grub screw in the side, you need to undo that before you try and unscrew the pin :thumbup
 
Noticed on clutch lever there is a small hexagon locking pin, but was unable to loose it despite the CRC i used.

Brake lever is no probs, but the cluch is and i do not want to waist it.
Need to look for secon option to get replacement brass parts that i need.

Sounds expensive....
 
Jussi said:
Noticed on clutch lever there is a small hexagon locking pin, but was unable to loose it despite the CRC i used.

Brake lever is no probs, but the cluch is and i do not want to waist it.
Need to look for secon option to get replacement brass parts that i need.

Sounds expensive....
Click to expand...

In the end i drilled the grub screw out and re tapped it a size bigger and put a bigger one in, works fine now mate :thumbup
 
Managed to get damaged lever.
The small hexagon was easily removed after some warming up with hot hot air.

It was thread locked, but hot air released the locking glue.
 

Similar threads

CHAPLAIN1
2002 Aprilia Mille R track/street many upgrades!! SOCAL
Replies
4
Views
1K
CHAPLAIN1
CHAPLAIN1
B
clutch lever
Replies
8
Views
2K
bullitt1964
B
W
Clutch and brake issues after new levers ?
Replies
4
Views
2K
weeksy
W
R
2014 Matte Black & Modded V4 ABS for sale.
Replies
1
Views
1K
RobTheRadish
R
G
Hello From the States
Replies
2
Views
649
redratbike
redratbike

New Posts

Back
Top