Want To Buy Bits needed please

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

Blade900

Joined
Sep 17, 2013
Messages
19
Location
Cardiff
As above due to my bike being stolen recovered and insurance not paying out on a technicality Ime funding this myself on a shoe string basically the bike was missing its complete swingarm wheel etc and complete front end forkes yokes wheel discs I just purchased a swingarm wheel etc but what I am missing is number 4 in this microfiche
CA07E45B-2F72-4B4A-9CA3-07A7DF66B6CE-158-0000000C7E885272_zps78958c3f.jpg
if anybody has 1 please get in touch also in need of a complete front end but have a feeling I need to build my funds back up for that that thanks guys
 
Hi I don't know much about it tbh it was my dads bike it's the last ov the v twin 1000,s apparently if that's any help
 
twin headlight or single?

I have a left hand headlight (nearside) for sale if it's a 2nd generation bike - 2006 on
 
Will the crown for the sprocket drive pin bobbins (number4 in schematic above) from a brembo 5 spoke wheel fit the tuono wheel and if so from what year I will buy a wheel that has this piece attached if so brembo 5 spoke wheels as fitted to rsv aprilias are significantly cheaper
 
Hi just checked part numbers with fowlers Bristol and the 04 brembo 5 spoke wheel from rsv Mille and an 09 tuono ten spoke wheel are the same so opens up the scope a bit does anybody have a crown from one of these models please
 
Blade900 said:
Hi just checked part numbers with fowlers Bristol and the 04 brembo 5 spoke wheel from rsv Mille and an 09 tuono ten spoke wheel are the same so opens up the scope a bit does anybody have a crown from one of these models please
Click to expand...
Eh? AFAIK,the Brembo wheel has a different number to to later Malgatech.
Yes the sprocket carrier is the same,but I'm not sure on the cush drive holder.Some of the Brembo wheels have a flat boss,...others are flanged.Not sure whether they are interchangable.Be careful what you buy.
 
Ok bike has twin lights if access to a milling machine is available is it possible to modify to fit ? If need be do you have any pics of the differences please or are there any threads with withe info on here really sorry for not being clued up on these bikes fellas as I said it was inherited so a case of learning as I go if it was a oldskool gsxr or something of that nature I would know what Ime on about
 
I have never seen a cush drive for sale on its own.They are usually bolted to a wheel,...so I reckon your chances of finding one,in good condition is pretty slim.
I'd look for a good s/h complete wheel.

You also need a sprocket,...how many teeth,...40,....42?Steel ones come up quite cheap.
Do you need the carrier as well?
What sort of hugger,...standard plastic or c/f?
 
I have bought a brembo 5 spoke wheel of eBay complete with Cush drive spckt carrier and a good sprocket plan is to use the Cush drive from the wheel on the tuono wheel by machining if need be if its not to involved otherwise I will fit the brembo rim and it's gibbons and buy a new Cush drive in a few weeks regards a sprocket IDE like to go at least 42 teeth maybe bigger if possible Ime looking for acceleration over top speed higher IDE like a abs or carbon either is better than what's on there ATM
 
Last edited:
In need of a tuono forint end lads forkes wheel discs and callipers aprilia rsv Mille would be acceptable
 

Similar threads

J
Custom ‘02 RSV Mille Race Bike
Replies
4
Views
2K
redratbike
redratbike
I
Hello! and i need some advice please :)
Replies
1
Views
1K
caveman1
C
Rizla
2012 Tuono V4 / rsv4 hybrid
Replies
4
Views
2K
Aldo
Aldo
camsdad
2001 RSV Mille breaking for parts
2 3 4
Replies
73
Views
8K
gixxerniknik
gixxerniknik
B
Aprilia RSVR for sale
Replies
0
Views
957
butchersdog
B

New Posts

Back
Top