wire

Hi guys I'm replacing the stock regulator on the rsv have looked at the thread at changing but my wires are different colours? Got the 3 yellow which is good then I have 2 red/white and 2 green and 1 black? Any ideas?

G'day Capo Tourer's, was reading a renewed thread (on the other forum site...) about panniers falling off, and decided to double check mine. One was difficult to lock on without giving a good shove and a push-pull check. Anyway, there's good detail and photo's on that topic - worth a read (AF1...

I noticed there is a gap of information for 04+ RSVR Factory bikes so I'm trying to post up some issues and conclusions to help others. I installed a new stator today and have the new Mosfet FH020AA R/R almost wired up. Its showing 14.26 volts at idle which is awesome. My issue is the stock R/R...

hi all as above had the front seat of and on the right hand side there is a wire disconnected its single core it looks like a small fuse holder in appearance :dunno

Hi all... I just brought my first Aprilia... 1999 RSV1000 Mille. With KNN airfilter airbox derestricted and aftermarket shorter can. I'm a massive fan of mods and making it go better, I have found threads on the ECU wire cut mod, but all refer to a Blue/Green wire... my ecu however only has a...

Just a quick one, my speedo stopped working late last night stopped to put something under the rear seat started the bike again and no speedo :-( so looking if I'd knocked a plug I pulled the rubber cover up on the ecu and 1 of the wires going to the smaller of the 2 plugs has a cut wire...

Hi guy Could anyone tell me if I need to cut the cable on ECU to run on map 2 of my 2003 tuono Cheers Dan??????

Hi could you talk me through this, where are which cable to cut? Cheers Dan :cheers:roost:roost:roost

Hi all, would someone be so kind as to help me identify the function of the components in the attached images? I've started with the ones i know, it's in relation to finding a fault with my intermittant fuel pump priming problem. 1. Starter Relay 2. Tilt Sensor 3. 4. 5. 6. 7. 8. Thank you

New bike only had it a week... Bike isn't charging, I've done all the tests with a multimeter, I think I know what to do, BUT the wiring is melted on the rectifier (aftermarket Electrex RR97) and I could not find anyone else complaining of this specific issue. Regulator got RED HOT in a matter...

The one that people cut/remove for more power As you look at the socket, it's the hole on the bottom right.....which would then be the bottom left when connected The bike's an 01, it looks as though there's never been one there and there's nothing visible in the harness either...is this right...

Hi Everyone,I've read around that a wire is to be cut to get full power from the milles is this true and if so how can I find which one or see if mine has been done,mine is a 2000 Mille r

Hi guys, new to milles got 2003 great bike love it,i have been told you can cut a wire under the seat and it will remap for a open system? any advice please. divingbig.

Im transfering my Techtronics shifter from my old bike ,but not sure which wire to go on the coils ,wiring was never my strong point cheers:dowhat

I want to try to make a sub harness out of an old wireing loom/harness and and and ECU. Anybody has a cheap/defective harness and ECU for me?

I've heard that if you cut a certain wire next to the ecu, it changes the fuel mapping or something to make the engine run better or quicker. Can anyone tell me how this works, which wire etc. I've just changed from standard can to a stainless, carbon can co. one and wondered if it would be...

I have an 03 RSVR that I've recently acquired. I've heard that the U.S. bikes have a wire that can be cut to boost HP considerably. Is this true and if so how do I know if mine has been cut or not...where is it located? Any details/info would be most appreciated! Thanks, Pete :thumbup

what is the wire everyone goes on about cutting is it on all models ie uk bike ta :dowhat

do i have to strip half the bike down... or is it easy for a numpty like me... or leave it to a expert !? :confused

ordered the air kit of hooked last week and fitted it friday night, real easy to fit even for me who has never worked on a bike b4. took the bike for a spin saturday and sounds gr8 but its hit a flat spot around 110mph, a few msg last night on here from DrRossi saying to cut the blue wire, got...