vibration

Hi Guys, I have an issue that is wrecking me out because I do not know what road to go down next to try to resolve the issue. I bought a 46k miles RSV Mille recently that had one owner from new. The bike runs A1 except for one very annoying / worrying problem. When the engine is under load, i...

Hi I have a 2000 RSV Mille it is a good bike and i am mostly happy with it but.......... Under acceleration it doesn't have vibrate (Like a jack hammer!!) It has oil pressure and seems almost smooth on constant throttle (Sometimes) so I don't think the mains are on their way out (Unless you all...

hi my friend.i am a greek and I have a tuono 1000 2008 model.i have a problem with my dear moto.when open throtle from low speed down from 6000 rpm I heve vibration to my foot. replace bearing wheel,check screws motor,replace sprocket and chain to supersprox front rear conversion 520 and chain...

Hi. I have a Falco with 14.5k but no service history. It ran fine after buying for about 300 miles noe it vibrates at exactly 5.5k in every gear and I can hear a vibrating metallic noise, not sure from where. The clutch is noisey when engaged, usual whirring choppy noise. I took it to my local...

Would anyone know the size of the anti vibration mount for the bottom of the oil tank, has any one replaced theirs and what size will fit? Aprilia are asking for £10 plus delivery, but there are plenty on ebay at a fraction of the cost. If the weather was better I would go outside and strip it...

Ok..... hi all, I've not been on for a while but I need to drink at the font of all things Tuono I have a beoootiful 2008 Tuono R..... it's done 27k miles and has never missed a service, last year on a run to France I noticed that i had vibration and a 'rattle' in all gears at around 4500 to...

help needed please , does anybody have the torque setting ,for the bolts that hold the anti vibe buffer housing or cush drive housing onto the rear wheel please . i have scoured this site and the other channel inc af1 for the info but none available , i have also read thru the pdf manuals...

HI Im Kevin from swansea and have just joined the site . Does anyone have any knowledge of or expeience of vibration from front forks on braking. I hav just got an Rsv 1000 and love the bike but there isa bit of vibration thats a bit of putting. All the discs and pads seem ok I was wondering if...

Hi All, This is my first post on the forum, i took delivery of my first Aprilia Tuono 1000r about a month ago and love it, after having jap inline fours the Vtwin is a all new beast. Iv covered about 800 miles on her so far and yesterday on the way back from a long ride out i started to notice...

Hi guys from new member, Bought by 2002 Mille the other day and have noticed when accelerating from around 2000 revs in 3rd gear there is a rattle / vibration. It happens in that gear only and not in neutral ?? Wondering if its just the belly pan / chain or somit else vibrating at that...

I've recently fitted some new EBC pads to the front calipers of my '07 RSVR and changed the fluid - first pad change it's had. The brakes are working superbly well but I have noticed a loose feeling vibration through the bars while braking to a complete stop that starts below 5 mph. Is this...

was out on bike tonight twos up,noticed a hard vibration from front when triing to push on abit,not notacible at low speeds but defo vibrates when opening it up,feels like the wheel may be slightly buckled,there is a chip on it thats been touched up.hmmm, its not as notacable when solo but have...

I have recently bought a 2006 mille r, under hard braking i get a judder from the front. I ran a permanent maker round the discs today, span the wheel and there is a tight spot which rubbed the marker of half of the offside disc. The buttons on the disc are all solid, i have read about freeing...

Firstly thanks for all help with information on this forum awesome. I have an 2001 RSVR that had 5000km on it and was still restricted. Iv done 5000kms two track sessions, bike is going wicked but now seems to be more vibration when higher in the revs to the point some teens where holding their...

Its not the mirror stalk or casing its the mirror its self in the casing, can this be tightend up...........:confused