vacuum

Hi Folks, I have a 2000MY mille and it's slightly hesitant coming off a closed throttle (just where you want some finesse opening up on the way out of a corner) I decided to check the throttle body synchronisation and now I'm curious??? One of the first things the book says is to remove the...

I'm about to balance the throttle bodies. Is that hose clamp on for the clutch vacuum line really necessary? Because I'm going the cut the' clamp and I don't really see a need to replace it as it should be sucked on not blown off. Is it there to keep the Lawyers happy? D

Where can i get 1.5mm ID vacuum hose from...tried ebay, bike shops n local car part shop and nothing Its to replace the small vacuum hose :(

Guys, can anyone confirm I have these readings right!!! My vacuum gauges read in mm (which I assume is mm/mercury) but the Haynes manual recommends the throttle body readings to be between 270 to 330 mbar! So, after checking the Internet for conversions, I have ..... 270mb = 202.5mm/mg 330mb...

as the title .... and any idea where to get some or a good equivalent

Hey y'all am looking to get a set of vacuum gauges for throttle bodies etc to balance the butterflies as a stop gap before a CO EGA set-up. Is there any point doing the TB's or should I just wait and get the CO done in a month? (Bare in mind i'm getting 85 miles before the fuel light comes on so...