update

Aprilia Forum

Help Support Aprilia Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. nichollm

    (UPDATE) Aprilia Mille R (RSV1000) 2002 3,500 miles (Reduced in price for quick sale)

    Aprilia Mille R (RSV1000) 2002 3,500 miles This bike is in track trim and has been used 3 times on track only. New battery with Optimate. All original bodywork, including tank, is immaculate and and comes with the bike. Included is a one bike trailer, (with spare tyre), and tyre warmers. Bike...
  2. Zuki

    Quick update on my T

    Just thought I'd post a quick update on where I am with my bike and what if any difference any of the modifications have made. It came with the Akro's, map 2 and a 15T front sprocket. First thing on the list was a pair of new tyres so I went for Metzler M5's in 190/55 on the rear. Excellent...
  3. A

    Collapsing rear suspension update - please read

    This is an update on my incident that I had when the Soupys lowering link failed on me. When your suspension collapses and the shock absorber is still attached to the plates the shock absorber does not have enough room through the swingarm and frame to move correctly. The resulting suspension...
  4. MumboJumbo

    Easytrack Update

    Hi all, don't know if anyone's been affecfted by the demise of Easytrack - if you're bored have a sniff around on google and some of the people on various other forums have been proper stitched up. I was lucky, only lost 100 quid. Well, I'd given up all hope of getting any kind of credit...
  5. G

    radial brake gen 1 update

    Does anybody know, or has already done a swap of fork bottoms on a gen 1 to gen 2 radial fork bottoms? Can it be done? and does a gen 2 front wheel line up if you do this. Cheers
  6. RSV 69

    fuel from overflow update

    hi again, i posted a thread about 12.30pm today about a few drops of fuel coming out of the overflow pipe. I know it was hot today and with heat the fuel tank gets hot but now things have cooled down there is no fuel or even vapour coming from the pipe. Am i being a bitch and over worrying about...
  7. tuono robbo

    2011 riders4research event update - track day?

    Well hello all. Some of you may remember me (was rsvr robbo), some may not as not been on here since the site crashed. Tried to register twice over the last few months but wouldn't let me for some reason? Third time lucky eh! Anyway, I'm back & ready to rock on roll so thought i'd put the...
  8. tuono robbo

    2011 riders4research event update - track day?

    Well hello all. Some of you may remember me (was rsvr robbo), some may not as not been on here since the site crashed. Tried to register twice over the last few months but wouldn't let me for some reason? Third time lucky eh! Anyway, I'm back & ready to rock on roll so thought i'd put the...
  9. tuono robbo

    2011 riders4research event update - track day?

    Ok, following on from last year's successful riders4research ride-out event to watch the BSB at Silverstone & the lack of interest shown for running something similar this year to watch the WSB at Silverstone, I've gone back to the drawing board & my original plan of running a track day in which...
  10. B

    Update on mods to my other Italian stallion

    Some pics of my MV and the mods i have done to it thus far, tried to keep the stealth look as much as possible, the wheels look superb in silver so they are staying as they are. If ya want more pics just ask:nana Fitted:- Arrows RG3 Mid pipe PC111 and custom mapped BMC race filter Zero...
  11. felix

    Clutch Slave Bolt - Update

    Just wanted to say cheers for all the suggestions / advice on the rounded clutch salve bolt. Tiz out !! ended up using a small hacksaw and cutting a slot in it, then hammered a screwdriver bit from my impact driver to widen the slot. few twats with the impact driver and it was JD :)
  12. B

    SIDESTANDS - update !

    Hi everyone, Well I looked at 3 possibilities for upgrading the stand. 1. Complete redesign.......Too expensive & too time consuming. 2. Fabricate the top saddle as one piece....Too expensive & time consuming. 3. Redesign the top saddle to accept weld on the inside as well as the outer mating...
  13. hydey

    newbie update

    well had the mille bout 6 weeks now, didn't have the best of starts with it for various reasons, I'd been off the bikes for about 9 months after I sold my gixer, then my mate was killed two days after buying the mille followed by clutch problems a week later, anyway after a tricky start getting...
  14. whitetrash

    Update...

    all back together, reverse built BMW Sprag works a treat... fired up first touch! Niiiiiiiiiiiiiiice :pirate
  15. Badger02

    Work Update

    Ok on a lighter note I also took advantage of some time to take care of the following items on the bike. I fitted the 40 jet clutch mod. I took care of the brown connector. Added a Zero Gravity Dark Smoke Double Bubble windscreen. Changed the sprockets to a 16/44 with a DID X-ring 520 series...
  16. wacker

    wackers update

    Getting used to this big 'T' now. First service in next couple of days. Love the grunt, handling and noise (Ak's fitted)! Smaller front sprocket being fitted at service. Be a bit more entertaining. Rennsports off the edge already. Good job had crash protectors fitted before delivery - went to...
  17. KISS MY RSV!

    Exhaust update

    right boys an girls, now that I got my laptop working properly now (piece of *****!):angry heres a couple of pics of my renegade can! check out my album for pics!:thumbup
  18. D

    Update on indicator problem

    A while back I posted about the left side indicators coming on when the revs on my new RSV went over 8 thousand. I finally managed to get to the dealers today and had a new left side switch block fitted under warranty. Looks like it has solved the problem, but I will be keeping an eye on it over...
  19. R

    Update!!! Changing Your Front End!!!

    Hi guys, I recently posted a thread asking for help in how to prop up the front of the bike so i could change my forks and remove the yokes!! Well...ive got round that very easily, so i thought id share this bit of knowledge with you as well as some pics to show you how!!! Step 1- Lift the...
Back
Top