tb

See my other thread http://apriliarsv.com/classifieds/24521-rsv-gen-1-parts-big-bore.html Sorry but I forgot to mention that they were Gen 2 parts in the other title and couldn’t see how to edit it in case someone was looking for Gen 2 parts, doh!

hi my gen1 tbs got damaged, so I have a replacement but from a newer model. question is , are they a straight swop as I noticed on the replacement it has a blanked off small pipe on the side near the base of the tb.- my gen1 does not have this. does this stay this way? or has someone sold me a...

Looking for a some 57mm TB's. Too fit in to a gen 1. Preferably with the tps and connectors, but not essential. Cheers Tomo

Looking for a some 57mm TB's. Too fit in to a gen 1. Preferably with the tps and connectors, but not essential. Cheers Tomo

As per the title, I have got a set of 57mm Tb's for sale including addapter plugs to fit to 98-03 RSV's. These are a good modification to do to the early RSV, looking for £100 including delivery. Cheers Mark

Looking at getting this done when mine goes in for it's MoT this coming month, what ball park figure should I expect to pay for the adjustments to be carried out? Ta. Gaz.

Afternoon all, I've brought in a 2000 model RSVR for breaking, ex race bike with some nice bits & pieces on. I'll be detailing more later, but for now is anyone interested in a full induction/fuelling kit for a Gen 1? This is a full kit fitted as an upgrade to a 2001 model engine. Basically...

I know there are plenty of threads about the internet on this topic, but as it's my first time doing this on the millono i figured i'd atleast explain what i've done to achieve what i believe should be accurately sync'd throttle bodies and CO trims in reasonable to good tune... I'd been...

Hi quick question too the knowledgelble folk on the forum , started to check my TB's and trim pots setting with my gas analyser on my Aprilia rsv 2002 57mm edwards throttle bodies , via the two testing points on the headers ( blanking screws removed ) and noticed the rear cylinder was rich but...

All prices in AUD and negotiable. Postage at your expense (will post anywhere) Oil tank and cover - has a dent in the tank and one bent tab cover is perfect - $150 Tuono sachs shock - VGC - $150 Right hand oil cooler - some bent fins and a slight bend in the bottom all on the back - $50...

Guys, I've managed to find a set of 57's from an'07 Tuono for my '02 Mille. Just a quick check to find out what's all involved in fitting them? What are the differences? Mark (Tash) should be able to sort me out with all the relevant bits but just trying to work out what all the differences are...

Hi all, i just fitted the 57mm TB's and need a custom map for the PC3 ( NO USB ). Could someone send met his custom 57mm TB's map plz ? Other upgrades; - Akrapovic 2-2 SBK titanium system - Hooked airbox - modified air intake - Edwards airducts Thnx Robin

I have got a few pairs of Tuono 60mm velocity stacks to fit 57mm TB's, these are an excelent mod for anyone who has fitted 57's to the RSV to bring the power lower down the rev range (where it matters in the real world). They are £18.50 pair inc postage, pm me if you are interested. Cheers Mark

HI, i remember that exist a post about a kind of conector to install new 57tb in a RSV old. Some one could help me to find it?

plug n play !! :thumbup

Would this be a beneficial mod on the 2000 engine. I was wondering if with the smaller valving that I hear my bike has compared to the 01-03 is it still a good mod? If so what other supporting mods should I get. I am going to get the stock header mod (that MHP does) at a local exhaust shop...

Hi, I purchased and installed a eprom from dr.rossi,followed the instructions(but not cut the wire) but the bike is very rough at low revs and sometimes dieing on me. I suspect that the TB sync is no good. Is it possible to adj the TBs without any special equitment so it runs more smoothy? One...

Picked this up from aprilia.me in case anyone is considering 54mm Tb's Do not buy these! http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&ssPageName=STRK:MEWAX:VRI&item=110300468227 item 110300468227 I bought a pair and the machine work is very poor there not 54mm to start with and there not...

Goint to get my TB's balenced on the EGA tomo morning. I have a Gabro chip for evo airbox and RSV ti EVO can and with ignition advancer. I read a post you guys did recently about sabres bike i think with similar mods and chip and a figure of 3-3.5% rather than 1%. What exactly does that refer...