switch

Hi, I have searched through the various threads about the iffy side stand switch on the mk1 RSV. Most posts say to by-pass the faulty units and take the risk that you might ride off with the stand down. I dont fancy taking that risk but also dont fancy paying £60+ for an Aprilia spare part...

After some help as summer is here and ive just put my bike out of action...... 2004 RSV Tuono - Common issue of a leak from the oil pressure switch. Took it out, cleaned, locktite 243 and went to refit. Whether it was over tightened in the past or I'm just an *****, either way, it has...

Lookinf for LH handle bar switch for Tuono from 06 models (AP8127703) Thanks

Hello all. When in mode my scroll switch is intermittent, is it possible to replace this part? Is there a quick fix? Thanks

Folks, My thermostatic switch which turns fans on/off is playing up, as they are prone to do with age. Anyone know the on/off temp spec, approx price and a good supplier for the Gen 1 switches? I understand it's a M22 x 1.5 thread spec (29mm socket). Is that correct? Apparently can...

Hi guys my front brake switch is not working i have a replacement and was wondering if anyone has changed this?

2004/5 Tuono Fighter Hi, could someone tell me the difference (if any) between a fast idle lever, and a choke? If the lever on my bike is a fast-idle, does my bike also have an automatic choke? Sorry for my ignorance :) Paul

Left hand switch Hi I just bought 2006 RSV MILLI Cat C Which has been turned into Touno. Can anyone help me my flasher button on my LHS dose not work. This button also works service resets ect.I bought it like this it had immobiliser removed. I have LHS with headlight button push switch with 2...

I've done a search and I see mention of people cleaning, lubing and 'stretching the spring' inside the switch. Is it possible to carry out this fix and get into only the switch electricals to clean it etc without removing the top yoke and drilling out the anti-tamper bolt? Looking at pictures of...

Can someone tell me or better yet show exactly where the neutral switch is located on the Mille RSV's? I believe mine bad as it is on all the time even when in gear, thanks.

Going to change my oil pressure switch as it seems to be acting up. Just wondering if I need loctite and what I should torque the thing to? thanks,

hi, my oil switch part number 956169 seeem to be weeping from where the electrcical wire atatches looked on ebay but no avail need one new one asap wheres best no dealers local

HI everyone after many years of trouble free Aprilia owner ship I have moved upto an mk 2 tuono Now the problem I have the spanner on the instrument screen The mode button seamed not to be working Or very intermittent So stripped it down and checked it out And seems to be working Ok...

Evening all, first post on this site as i have not had much time to be able to ride the bike this year, shocking I know but after a weekend away with the lads and the bike behaving awesomely, bit dismayed now as when out on a blast the bike died with no warning whatsoever, no alarm function...

The side stand switch looked corroded so I temporarily cut the wires and 'pigtailed' them together. The side stand light on the dash is out and the bike starts. I looked at the switch and the corrosion appeared to be on one of the soldered connections. So I cleaned it up and resoldered the cable...

Any body happen to know the PN for the fan switch on a 2000 Mille? Looking through the part pages on the interwebs and the switch does not seem to be illustrated :/ Thanks

HI, probably a really dense question, but to change the thermo switch on a Falco, do i need to drain the coolant first? If so, how (never done it before) Cheers Simon

I replaced my old rear sets, that had no break light switch, for new one's with a hydraulic switch. Could someone tell me where the 2 wires go that come off the switch. Cant find the original wires from the OEM switch. MANY THANKS.

Greetings All. Just posting in the new members area and already need to ask for help! Fairly familiar with the RSVs as I have had a couple of RSV Mille bikes and now on my first Tuono - superb bike and luvin the higher bars! My Tuono is a Gen 1 2004 model. On my last RSV Mille (2003) I...

I need the above it's the one with the settings button on the front.