This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

settings

  1. leslie

    Gen 2 factory tuono Ohlins settings

    Does anyone have the standard settings for the Ohlin's suspension on the Gen 2 Factory Tuono, if so could you please post or pm them. Leslie
  2. Daveish

    Front fork settings

    Hi there I've been out for a few rides on my Gen 2 Tuono and everything seems in order apart from one thing. When you hit a pothole my teeth fillings rattle. I'd like to take it back a couple of notches. What part do I adjust? Thanks for you help in advance. N.B. I have made a note of...
  3. 4vr

    dave moss suspension settings

    so ive paid for a pro to setup my sus, id like to share them, im around 85-87 kilos without gear, maybe 91-2 with gear, Tuono v4, preload 7 turns out comp 10 clicks out rebound 6 clicks out 2cm through clamps rear shock 1.3cm thread showing 1 turn out comp 9 clicks out rebound...
  4. T

    Aprc settings for clutch up wheelies

    Can anybody help with optimum aprc settings for clutch up wheelies please? I have the AWC totally off, the mapping on 'T' and the ATC anything from 1 to 8 but on cluthing up in 1st the aprc often kicks in and slams me down a few inches off the ground. It seems to work best when accelerating...
  5. B

    stock rsvr 02 ohlins suspension settings

    hi guys after stock settings for ohlins front and rear suspension for a 02 rsvr thanks
  6. Cable guy

    Torque settings

    Morning guys, Just changed to a 15 tooth front sprocket , before hurtling down the highways & byways , could one of you gents provide the torque settings for rear wheel nut & sprocket bolt, Regards:cheers:cheers
  7. Tuono2Go

    Suspension Settings

    Hello, Just picked up a new black 2013 Tuono about 10 days ago. Love it so far.:thumbup I was able to head out to some twisties this weekend and put about 320 miles on it. Getting close to the first oil change. I know I need to wait until it is broken in but I was wondering if anyone could...
  8. O

    suspension settings for 10.5 stone

    Hi all new to here , decided to get suspension dialled into my weight , any advice not done it before , i have the 2002 rsv mille and I'm 10.5 stone , can i do it all by the preload rebound comp , or do i need stuff changed internally ? cheers in advance Olly
  9. A

    Gen 1 tuono clocks settings

    My battery went flat and the clocks reset themselves. I know by holding A for 5 then pressing B and holding A for 5 puts it back on to MPH but how do I set my Shift light higher and how do I set the time on the clocks also ?? Cant find it out anywhere :crazy:dunno:thumbup
  10. T

    Gen 1 Brake Disc Torque Settings

    Guy's does anyone know what the torque settings are for the front and rear brake discs?
  11. C

    Double checking torque settings

    Just finished swapping some shims over as both inlets on the front were over by 0.03mm. Was able to swap one over and bought the other from Griff (great service - thanks). Took two attempts as I hadn't calibrated the micrometer before using it:roll the first time. Now have everything back...
  12. B

    Suspension settings rsv millie r 2001

    Hi can any body tell or advise me into setting the front suspension back to factory on my RSV Millie R 2001? only as of now when i ride the bike at slow traffic speed (40) the front end does what it wants not what i want it too...And when i turn into corners it feels ike im going way to far over...
  13. grin factor

    Suspension settings.

    After a ride out yesterday I felt when I was pushing on the bike felt a bit wollowy, not as stable as it could be. So today changed them to settings in this article:- http://www.sportrider.com/suspension_settings/suspension/146_suggested_suspension_settings/index.html Haven't been out yet, but...
  14. M

    Damper settings....

    Just wondering what setting everybody has their steering damper set on? On my 2001 RSV-R I have it 6 clicks in from the softest setting......
  15. D

    suspension settings after handlebar conversion

    help needed with suspension settings for 02 rsv have done handlebar conversion to upright bars. does anybody know if tuono suspension is the same as rsv or has anybody done same conversion cheers dave.
  16. karlosrsvr

    2006 RSVR Suspension settings....

    Does anyone on here have the standard suspension settings for a 2006 RSVR?..The lad i bought it from said he stiffened everything up and i would like to put it back to standard..Thanks Karl.
  17. andirsv1

    O2 settings???

    Guys, I have just fitted a set 57mm throttle bodies to my road bike (got them on the track bike too and made a big difference!!). I had Griff set up the track bike last time and can't remember what the front and rear cylinder settings should be................anyone know??? Cheers for any...
  18. D

    Trackday tyre pressures/suspension settings

    doing trackday donnington tuesday any info on tyre pressures maxxi, and suspension settings rsv 02 upright bar conversion done cheers dave
  19. A

    struggling with menu settings

    new V4 arrived last saturday; amazing bike, love it but..... the mode button is apparently how you call up the settings menu, by holding it down at standstill. It seems to have stopped happening ie no menu. Everything else works. Anything I'm missing?
  20. asbo

    Torque settings for crash bobbins??

    Howzit peeps, hope all is having a good weekend out on there T`s. I have just got some R&G crash bobbins, the front ones. What i dnt know is if there is a torque setting for it when i tighten it up? Aswell as anay advice on fitting them what i should look out for? Thanks and see u on the...