seals

Hi guys i am looking for somewhere in London to do my fork seals?? Forks off the bike. Cheers. D

Originally posted on Aprilia Forum: My '00 Mille is leaking fluid from the Evo clutch slave cylinder. 1. Where can I find Evo slave cylinders and parts? Is there a website? I've searched and searched but clearly I am doing something wrong. 2. Do I need an Evo specific seal if I'm going to...

So I've had two different mechanics from two different shops here in LA rebuild the standard showa forks on my 01 mille since January of this year and they are leaking yet again. I use the bike to commute and i ride the snake and other Malibu canyons when i can so reasonably hard riding but not...

Go to fit new fork seals 2 questions Which way round does seal go What volume of oil does it need Cheers

Go to fit new fork seals 2 questions Which way round does seal go What volume of oil does it need Cheers

Looks like my Ohlins fork seals are starting to wilt, I'm getting some seepage which was mentioned on the MOT cert (I had noticed myself as well) I'm ok with removing the forks myself, who wold you recommend I use for replacements? I noticed Fox Racing are offering £105.00 for the service. The...

As per the attached photos, I have a dogbone + plates + bolts + bearings + centre pins + seals for sale. These were bought for my 2008 RSV1000R, you may already know if they will fit other models. The bearings are brand new and are the correct HK1812V (V is for vehicle), full compliment...

Fitting my new front indicators and noticed the left fork seal is leaking . The forks were modified by k-tech but i assume the use the normal seals . Im quite handy with a spanner and will try most things but dont really fancy doing the forks . I heard something about using gsxr seals ? So who...

Need a back caliper from a gen one ,or a seal kit Anyone ?

I think i fried my rear caliper seals yesterday, not checked them yet but they were warm disc and pads were blue and i couldn't touch the caliper. Where can i get some new seal from look on ebay nothing.:confused

How hard is it to fit new fork seals to a 2002 r with onlins. Just go home from a ride out to fine both seals leaking.

I've been getting well into my winter service, stripping the Brembo's found a lump of corrosion on the side of a piston, in the layer of Teflon. Looks to be bang on the position of the oil seal.. so thats that.. new pistons needed. This is a well looked after 08 RSV Factory, with fairly clean...

Evening all Does anyone know the sizes of the front wheel bearings please and seal sizes for the RSV1000R 06 model please? Regards Lee

Can any one recommend what seals to put in ohlins forks other than std ohlins ones as am now on my third set this year at two different suspension shops.It seems that all the time the bike is being used regularly there is no problem but as soon as left for 2 or 3 weeks I come back to leaky...

the ohlins forks on my 08 factory have started to weep again, second time and the bike has only done 1100miles, my other bikes 00 tl100r did 36000miles never needed fork seals, 04 zx10r did 34000miles and again fork seal lasted no problems i thought ohlins was supposed to be quality gear but...

Hi Peeps,I`m not an avid poster as Iv`e normaly not got much to say that makes any sense :crazy. Any way I digress,Just been quoted £140 to have my fork seals done including oil, on a ride in basis,£110 if I take the forks in loose,my first response is :eek2.What do you guys think on the cost...

Hi all, My RSVR '06' has leaking fork seaks, i understand GSXR1000 K4 seals do the trick. Has anyone replaced these and do you know if they last longer than the Ohlins ones. Also i've heard Ktech do seals that fit, has anyone tried these? My local mech has quoted £110 + parts. Are special...

Hi....will any 43x55x11 or as near as 11 fork seal work with the Ohlins Forks on an 05' Factory.....i used Suzuki 43x55x9.5 in the past with no problems but I see there are 10.5 seals at the same price. Any opinions on alternative seals would be great.

hi guys just a few numbers for you if your looking for bearing or seals for your wheels or whatever ....they do all kinds no need to go to a main dealer or fleebay bayliss trading---- 01772 622543 guys called steve :thumbup royce power ---- 01279 421461

Brand new set of head bearings and seals for 99 Mille. May fit other models. £20+postage.