seal

Lads, started to lift my petrol tank backwards to allow access to my throttle cables, a bit of petrol leaked through the cap, so I had to stop, I don't want to drain the tank , I can remember an American guy on YouTube fitting an "O" ring on the inside of the cap which sealed the tank...

Lads, I have added a Seal Mate to my already extensive array of tools and thingy mabobs, non of them acquired from our engineering workshop you understand. Has any one used this there are several instructional videos available on YouTube, just wondered members experiences with this...

I'm just in the process of replacing my fork seals on my 2001 RSVR and am not sure if they were replaced correctly last tome by the previous owner. When I stripped the forks the parts came out in this order: dust seal - circlip - fork seal - washer. This does not seem right to me as it would...

Hello all, Can anyone offer advice please? Following a leak on the right hand casing of the bike and trawling through these forums i have come to the conclusion that my water pump seal has gone. I have taken my bike to a local mobile mechanic who ordered the new seals then decided he couldn't...

Changed the levers on my 08 RSV1000R (Brembo brakes). No matter what I do, I cannot get the dust seal to slip over the little plunger on the lever any more. It's sort of 'pinched' and squashed now. I've tried lubricants, I've tried pulling it with point-nose pliers. It doesn't seem to be...

Hi, I need new brake pads for a 2006 RSVR with Ohlins forks and Brembo brakes. At most I need fast road type pads, certainly nothing approaching race standard for my abilities. I don't have a lot of spare cash to say the least right now and need to get the bike through an MOT. Any bargains you...

Hi. After changing my fuel filter and putting it back together. I no have a leek. Iv searched and searched the net but I can't get an answer. Can someone just tell what to use to seal it!!!!!!!?!?!?!?!?!

Hi i need a dust cup for the master i ordered 61013008000 from ams i i read somewhere on here and other forums they fit got mine today too big no number on it to check they sent the right one . anyone confirm this fits a 2001 mille brembo master or anyone know where i can get the oem thanks

Could someone please point me in the right direction to buy something that will stop the fuel filler leaking. I'm getting tired of having petrol in my nuts I've tried a rubber O ring and it's better but still leaks out. is there a magic cure out there somewhere?? thanks

For bearing seal degree, there are two main factors affecting bearing seal performance, processing and manufacturing precision, cooperation between various parts and assembly quality. To solve this problem must be in-depth study of the two. The influence of the sealed bearing precision...

Hi there, After doing my pre mot checks today I've found that the fuel pump had a leak at the rear of the pump. Having now removed pump and searching online for a new seal I've found that 'ApriliaPartsOnline' have two different seals listed for a '02 RSV Part Number : AP8144477 (£12.01) and...

Hi, I just had a 300 mile round trip on my factory yesterday, its 3 years old with 10K on it, I have had it a year (2nd owner) and giving it a clean today found oil residue & grime on my left fork leg and caliper mount etc. I gave it a clean and pumped the forks and it definitely looks like a...

dam and i never pull wheelies but diff sprockets make it serious fun:) i hear people put gsxr fork seals as a replacement as there meant to be better ,its a simple job but i am told as there ohlins forks you need special tools otherwise yr make a mess of it, is it worth...

Hi guys, I picked up my son from school tonight and noticed a smell of fuel coming from the bike. Upon inspection i found vapours coming from the filler cap (metal tank). The vent holes are clear it literally is coming from the outer ring with the allen bolts going through. Anyone know where to...

Dear all, I had a slight water leak from the water pump weep hole and was preparing myself for forking out the 300 odd quid to have it fixed. However I thought I'd try a flush out and coolant change first first. I got some Halfords Advanced OAT coolant and a bottle of Holts rad flush, dumped...

Hi thanks for the gearing advice and tyre advise from my previous post, after forking out for the new C & S service etc now have a leaking fork seal, anyone know anybody in the berkshire area that are realy good and quick as i dont want to ride it now that i have found the leak and it has...

Hi how would I know if mines leaking , Aprilia rsv 1000 ? bike runs fine ( had been standing for a few months sprag clutch had gone ) but noticed the coolant cap had a milky solution round it , spark plugs are fine so I dont think its head gasket Thanks eddie

I recently had an issue with the clutch on my RSV Mille R 00. The clutch would not allways work and I found myself fighting the gearbox from time to time. I noticed that if I pulled the lever really slowly that nothing would happen. The clutch would not move. If I pulled it harder and faster...

anyone know what the dimensions are of this o ring? need to replace mine

Hi fellas My Evoluzione clutch slave just weed on the garage floor, ive stripped it down to find one of the three rubber seals has a chunk missing. Does anyone know where i can get replacements? (i cant seem to find any contacts for the company that produces them) Thanks Rob