hi i set my sag last night on my 99 rsv mille and now have 30mm rear and 26mm front but my front if wound rite off and rear spring is done up all the way is that a normal thing to have im only 5.7 and weight 11 stone with all gear on also i adjusted it with everything set to soft any help or...
hi, can any one tell me a simple way to check the sag on my 05 rsvr, i am a bit of a short *** and considering a lowering kit but every thing i have read say its not a good mod, the shock is set to its shortist lenght and all settings are set to the book so all that is left is to check the sag...
I just measured the sag (on the bike silly) I got 33mm front and 40mm rear (second measurements were taken seated) I know that 30mm each end is normal but do any of you have sag settings specific to the Tuono?
Hi im trying to set my rear sag im 13 half stone with gear on. im getting around 40mm of sag at min how do i reduce sag to between 30 35mm. iv tried tighting the rear spring and dosent seem to do anything apart from make bike bit higher can anyone post there setting for rear shock for fast road...
:dunno Does anyone know the sag settings for a 2000/01 mille? I have reset all suspension settings to standard but have been advised by one of you good chaps to set the sag aswell many thanks
was up early this morning for some reason, so thought i'd make the effort to check and possibly set the sag on the mille.
from what i have read and watched on youtube, the going rate for a road bike is 35mm of sag.
now i'm no lightweight at 16st (i hide it well, :roll) i have found that the...
Hi everyone
bit bored today bad weather, So I have been in the garage checking my sag values
just wondered if there is anyone that can tell me if they seem ok
front rear
static 31mm 12mm
rider 45mm 39mm
also how does that compare to some...
evening all,
Pretty much looking for the above measurements if possible? Going to the station tomorrow to adjust the suspension as it's something i've never done with this bike and was hoping someone can post on here what they should be so i can print it off and take it with me tomorrow...
No, not the baggy around the bum leathers!!
I'll start this tale from the beginning so that it makes sense. After the pipes/map job I was finding the front was getting skittish quite frequently. Spoke to Iain at Forza about a steering damper and he said he'd set up the suspension before I went...