required

Hi everyone, since buying my gen1 tuono factory I seem to be on hear all the time. However its a great bike and I am determined to get it sorted. So I have just purchased a new ducati 1098 brake cylinder and would like to know what brake line to purchase as the, cylinder has a side banjo mount...

Hello all, Do any of you kind people have a brake lever barrel, dowel, grub screw adjuster assembly ? Mine pinged out and cannot be found. The bazzer. Thanks in advance.

Has anyone installed the Headlight Cut Relay System designed by the Triumph/Suzuki auto-electrical wiz D'Ecosse on their Gen #1 Tuono? Here is the circuit for the Suzuki '03-'04 SV650/SV1000: If anyone has installed this system on their Gen #1 RSV/Tuono I am needing some advice as far as...

Hi, I've just bought a gen 1 tuono, and I suspect the fork oil is a bit old. I've changed forks oils in my old bikes but they were all RWU damper rod type forks, I've never looked inside USD forks before. Do you require any special tools to disassemble the forks, spring comressors etc. Plus...

Hi all, thinking to do a couple of track days later this year and looking for a bit of advice, never done a track day before so my questions are, which tyres would you recommend (Bridgestone s20evos on at the moment) tyre pressures and any other top tips you can give would be greatly...

Good evening boys and girls. I've just bought my first RSV last Saturday and heading back up north to pick it up tomorrow, my first V-Twin also. I know a bit of the history of the bike and know that it's mechanically sound. However, it could do with a bit of work cosmetically. My problem is...

I've tried searching but can't find anything that helps, so - Left the bike ticking over this morning in the garage, first time started for a few weeks, it's an 06 gen 2. All was well until, I pushed the mode button, rear button l/h switch gear, and the headlights went dead, sidelights...

Hi guys, I need some help. I have just lost my best friend to cancer and although he's not on here we got into motorcycles together as kids and I've known him all my life. The last thing I want to do for him is give him a huge send off so I'm calling on all biker friends to join a parade from...

I've a 2012 RSV4 Factory and have a akrapovic carbon silencer but the link pipe had a CAT so decided to have a new link pipe but this time with 63mm instead of 60mm and I'm opening out the pipe from 54mm to 63mm. If I do this do I need to get the ECU re-mapped. So any mechanics out there please

Hi just wondering if someone could tell me what bolt or fastner is needed for the underside of the seat unit. After I bought the bike I found that I was missing all 4 of the bolts that fix the tail unit and undertray. I have managed to get two sorted for the rearmost two but am struggling to...

Hi All, I finally got my 04 (03 model) Mille as I wanted it, with new end can from SP Engineering, sll serviced, plugs changed, new chain n sprockets, cleaned and waxed and really not needing anything else done. 3 days later some moron knocked it over with a car while it was legally parked in...

Hi all, I'm after a standard gen1 clutch lever, specifically the small grub screw part that pushes into the rubber flange when you squeeze the lever. Of course I realise I need to buy the whole lever. Managed to snap this part in a fall (don't ask)

Not been on for a bit but recently dropped the Tuono and require some bits if anyone can help me out. Its a 2008 Tuono, I need, Radiator Complete belly pan, (if not genuine does anyone know any others that will fit? ) o/s clutch cover Radiator expansion tank plastic cover o/s top...

Guys, I'll be looking to fit the MOSFET reg to the factory this week (if the furukawa connectors arrive in time) and wondered if I should fit an inline fuse along the route? Heard some say yes, some say no?? If so, I take it i insert it into the live wire just before it connects to the...

Folks I'm in a bit of a tight spot and require a dog bone for a 2002 rsvr... must be in good condition with bearings that aren't seized in situ... Thanks!

I am looking for a starter clutch complete with magneto for a 1999 Aprilia RSV 1000. I am in South Africa, can anyone help? This is the 3rd time bolts have come loose and destroyed the magneto!

Anyone have any info on this chip? Have just been given.one.. is it meant to have a sister board? As this one does not.. if the case is that its meant to have a wee sub board.. then am I right in.assuming the chip is scrap?

Hi all, Just wondering wher I can get a larger rear spring for my 03 milie (Sachs) ??? I recently set up the sag etc and iv had to wind the existing spring right down :( I'm 6ft4 and not very light Lol

Right... had a few electrical grimlins which i thought were resolved...but today all hell broke lose....the rear brake seized and the brake hose melted which caused the sensor cable on the back rear to melt through(would that affect anything???) I stoppped my bike to cool it off so that i could...

I've just acquired a mint Mille 2002 with 3k on the clocks and decided to 'track it'. Got all the fairings no problem but really struggling to acquire a pair of air tubes! Does anyone know where I can get either OEM or Pattern ones from? All help appreciated.