rebuild

Had a crash at a track day last year and my -03 Tuono got beaten up. First thought about selling it since I have a house, kids, works a lot and don´t have the spare time to spend in the garage. But since I really liked the bike and knew it were in perfect condition except from the scratched...

Hi All, I an new to the forum and new to Aprilia. I have just replaced the balance shaft gears on my 2001 RSV. Problem is that once back together it only seems to be running on the front cylinder. It is getting fuel, and sparking. I think that when i lined up the balance shaft gears the engine...

Hi, not sure if this has been posted before, but I'm getting my local bike shop to rebuild my forks ready for Trackdays in 2014 Can anyone tell me what weight of oil and the air gap for fast group Trackdays for a 13 stone bloke ? I'm getting reactive suspension in York to do the rear shock...

i have rebuild my RSV for track use only so have following items for sale: original exhaust all the fairings in grey color. left side is damaged a bit headlight rear light small turn indicators pillion seat pillion seat cover as to be seen on http://www.victim.sk/gallery2/v/mille/ if anyone...

please delete

I`m assuming its the clutch master. Pull the clutch half way and hold it, it looses pressure you you see the resovoir level rise until levers back to the bar. Let go and grab a fresh pump, fluid level goes back down, as pressure returns, before dropping again. Doh! Is it worth rebuilding it? or...

I have a frame off a 2000 Mille R. I bought this frame with a motor for my bike. I needed the motor, and have this frame left-over. The frame comes with a clean title and is in EXCELLENT condition. This frame should fit any Mille 98-03, but check with your dealer to be sure if this frame...

after blowing up my street mille (well, not actually, just a rod bearing) two days ago i've started to rebuild it from scratch. i own a motorcycle shop in bucharest but sadly it blew up in my hometown, galati where i don't own a garage anymore (i currently live in bucharest) so i decided to...

Well, after much work over the winter I've finally finished my project (well almost apart from a few small items). Pumping out 132.5BHP and 75ft/lb of torque, by adding a modified air tube, filter, titanium race cans, power commander with ECU set on map2 etc etc. :bigsmile

happy new year to you all. Ok had a bit of spare time so did a bit more to the T project. Came across a couple of problems,,,, 1, front wheel, when tightened one of the calipers is catching the disc its like the wheel is sitting off set, the wheel, spindle and spacer are replacement parts...

Afternoon all.. Ya miss me? :thumbup Been a bit busy moving house ect. but im back! and the bike is almost too... BIG thanks to Nob for the pipes and putting up with my crap PP :thumbup Its almost coming back to a town near you...

just done up mattblacks stubby can as the paint on it was bubbling and peeling off,took it to work and drilled out the rivets slid of the sleeve and not alot fell out , the db killer was rattling around in thin air and the amount of packing was about 20% of what should have. luckily he had a...

After two major disasters 1/ big end faliure 2/ the $3000 quote to fix it I decided to venture of and the fix disaster myself ........... and found s#*t loads of design faults which I intend fixing ! Falco 2000 by the way ! Ive started by getting the the crank machined and the rods rods...

Does anyone know where I can get my ohlins Forks rebuilt. I live in Oxford and would obviouly prefer some where local. I can;t drop the forks out myself as i no way of doing it. I only want them rebuilt as they come from an 02 bike which have probably never been done since it was new. Cheers

Hey guys, just thought I would share a few pictures of my old road going zx7r which is being transformed into a track bike. The current engine is totally gone, only salvagable for parts mainly. Big end gone after a 100+mph slide into a field caused the engine to be starved of oil :( O well...

Need you're help guys building my 04 factory back up after full strip down service , started to strip and clean the brembo front calipers, after taking out pads noticed inside ones are thiner than outer one s thought nowt of it reassembled thinking it must have been a sticking piston, both...

Stage 1 of the Rebuild UPDATED 07.03.08 Stripping down the bike Alright lads i finnally got round to stripping all the broken bits of the bike so i thought id share a few pics with you all As it was to start with Stripped most of the bits off the front and found this which was a bit of...

stripped it down last night and found a few things I wasn't expecting. I've changed the front wheel over to the straight one with the good disc's and inflated tyre and i've stripped the majority of smashed parts. Two things I didn't notice or count on is that ; 1, the frame apears to have a...