preload

G'day all, I was curious about my fork adjustment, so I counted the number of turns to full clockwise and discovered mine had been set to 9 turns out. This setting on my 04/2014 build (new in Feb2015) has been brilliant and it was only curiosity that tempted me to confirm the setting (standard...

i'm trying to reset my fork preload spring on my 04 factory.. but faced a difficulty to turn the bolt as it's too tight either counterclockwise nor clockwise.. do i need to lift the frond end first before resetting? or its a sign of any problemo with the fork? TQ!

Another bargain! Taken from an early Gen 1 but pretty sure will fit most models with the appropriate link plates if necessary. Ohlins rear shock, the upgrade one with the remote preload adjuster. You'll need to use your own top mount bush. Very good overall condition Again, looking for...

As I have just got the bike (2003 Racing) , I am setting it all back to 'as per factory' and will mess with it from there. problem is, the RSV and Tuono manuals have the fork spring preload info completely opposite!!? RSV manual says go anticlockwise (**) fully and then 8 turns clockwise (*)...

Hi All. Tried setting up the rear sag the other day but I've run out of adjustment on the remote preload adjustment. This only gave me about 10mm of adjustment, it looks as if I should be able to move the whole preload adjuster further down the shock body by turning the upper castle nut. But...

Fed up of the usual ebay scrap. Mate is offering to hand make these. Made of titanium and finished perfectly. Cost around 80but to be confirmed. Please let me know if your interested.

So i ordered some preload adjusters from ebay for my 01' mille and the guy writes back asking the size of the preload nut. I'm out of town this week and won't be able to take a measurement myself...I was pretty confident the guy would know considering the item was sold as "for a 00-03...

Thought some of you would like the to see the latest custom part ive made for the mille :thumbup

Hi to you all Does anyone know if you can get a hydraulic preload adjuster for the Sachs rear shock? ***Sorry,posted in wrong forum section.**

Alright lads has anyone got any or know where to get some front prelaod adjusters (andosided red nuts on top of the forks) Had a bit of a weak moment where i lost me temper fitting the top yoke there was hamours flying all round the shop :dowhat

Please can anyone tell me what the preload settings should be for a 1999 RSV Mille? or can they give me an idea where I can find the info. Thank