plug

hello guy. ive just bought a 2004 rsvr wiring loom with a datatool alarm that i would like to remove and fit on my ducati but am having some problems identifying some of the plugs that the wire trace back to. any help would be good. 20160827_212258_zpspfjcnaps.jpg Photo by fezzo2003 |...

at Shift Power I'll let this go for £180 posted a big saving on new. Message me for dibs used for three track days fits all 4 plug Aprilias, plug and play brill piece of kit

Guys I've rounded off my sump plug, what's the best way of getting it out? So far I've tried hammering a bigger star drive in but its gone like soft cheese.

just checked the yellow wires in the brown plug all ok butt followed wiring to a big white round plug with the 3 yellow wires in pulled it apart and its burnt out cut wires fixed back together I have 13.7.to 13.8 at tick over and 13.3 to 13 .4 at 4000 rpm is that ok ore is there a fault all help...

Hi, I own this bike for a week and loved it till now. I had the following problem: Trouble to start my RSV 1000R 2001, thought maybe the charging system or bad battery. Did let bike sit for a few hours and started right away. Rode for about 10km, fuel light went on, few hundred meters later it...

So i thought i'd swap out the plugs on my 2004 tuono amd after buying new plugs, bendable wrench and watching a decent vid of how to change the plugs on youtube i thought id have a crack at it last night. All was going swimmingly - near sides plugs swapped without removing the air filter...

Is there such a thing as a plug and play gear indicator for my 1999 RSV mille ? I had on my GSXR but I can`t find one for this. My mate will wire one in for me if not but he can`t do it before I do Brands hatch on the 25th and I know if I try myself I`ll do some sort of damage !!

Take a look at the drain plug next to the oil filter cover. I've just done my first diy oil change. I took some advice posted on here and ordered a KTM bolt head drain plug instead of the hex key original. Bloody good job too, looks like the monkey previous owner f'd up all the allen head bolts...

Hello all. My Allen keys are obviously tougher than my magnetic drain plug as I've managed to round off the inner. Is there a solution to get it out that's better than mole grips? Thanks

Doh, I think I might have stripped the drain plug by the sprocket! I used the torque wrench but looks like the silly recessed alan key has turned not sure. I bought one of the KTM replacements so I hope that's it. Will take a closer look soon. Any pointers ? Ta.

Is there a copper or ally washer to mate the surface of the drain plug head onto the crankcases? I have a gen 2 rsv 1000. Thanks.

Did the oil change on the RSV only to get as far as the drain plug on the engine casing. Which had a round hole where the hexagonal one should have been. I've tried the correct hex key and it just spins. Which doesn't fill me with confidence and probably means the last oil change was only...

Hi all, I am planning on doing battle with my non start 2002 rsv Mille this weekend. Was running perfectly when last parked up, 2 months ago. Now it just cranks, floods and won't fire. Battery is good spins over real fast. Going to try a new set of plugs at the weekend. However, I have noticed...

Chaps just a quick one............. Half way through the white & Brown plug mod. Brown plug done, easy. On the white plug i have 2 x red/black wires and 2 x red/blue wires. Am i right in thinking that the extra wire goes from the red/black cable in the white connector to the red/black cable in...

Probably been answered before but what size socket do i need for a 2000 mille. I used a tool from a yamaha xj6 to get the rear ones out but its too short for the front ones.

Nearly finished my Tuono 2006 project just a couple more bits needed. Can anyone tell me if the main electrical plug for the dash has any rubber or plastic cover ? I am going with a non-standard headlight unit so the plug will be on show and open to all the elements Thanks r101

Don't suppose anyone has got one of the little red plastic cover thingys that go over the serial plug on the older power commanders that they no longer need? appear to have lost mine and dont want moisture to get inside it and ruin it...

Any makes will do or does it have to be Aprilia OE ones Cheers guys

Mornin' all... I got the Mille stripped down a bit at the weekend, mainly just to have a look under the fairings and see where the relevant bits are for the oil change planned for next weekend. I noticed that the allan/hex head on the oil drain plug (crank case not oil tank) is a bit mullered...

Looked at my rectifier wiring last night and took the plug apart it is all in excellent condition with no signs of overheating.............. Now my dilemma is do I chop this plug out and solder the yellow wires together or leave it for now and just do the solenoid, extra earth strap to...